Abstract:The maximum sensitivity function as the conventional robustness index is often used to test the robustness and cannot be used to tune the controller parameters directly. To reduce analytical difficulties in dealing with the maximum sensitivity function and improve the control performance of the proportional-integral-derivative controller, the relative delay margin as a good alternative is proposed to offer a simple robust analysis for the proportional-integral-derivative controller and the first-order plus dead-time systems. The relationship between the parameters of the proportional-integral-derivative controller and the new pair, e.g., the phase margin and the corresponding gain crossover frequency, is derived. Based on this work, the stability regions of the proportional-integral-derivative controller parameters, the proportional gain and the integral gain with a given derivative gain, are obtained in a simple way. The tuning of the proportional-integral-derivative controller with constraints on the relative delay margin is simplified into an optimal disturbance rejection problem and the tuning procedure is summarized. For convenience, the recommended parameters are also offered. Simulation results demonstrate that the proposed methodology has better tracking and disturbance rejection performance than other comparative design methodologies of the proportional-integral/proportional-integral-derivative controller. For example, the integrated absolute errors of the proposed proportional-integral-derivative controller for the tracking performance and disturbance rejection performance are less than 91.3% and 91.7% of the integrated absolute errors of other comparative controllers in Example 3, respectively. The proposed methodology shows great potential in industrial applications. Besides, the proposed method can be applied to the design of the proportional-integral-derivative controller with filtered derivative which is recommended for practical applications to weaken the adverse influence of the high-frequency measurement noise.

Maximum sensitivity (Ms)-based I-PD controller design for the control of integrating processes with time delay

Intelligent Optimization Design of PID Controller for Integrating Processes

Optimal PI–PD Controller Design for Pure Integrating Processes with Time Delay

Robust Pid Controller Design Using Co-Evolutionary Particle Swarm Optimization

A Developed Method of Tuning PID Controllers with Fuzzy Rules for Integrating Processes.

New PI-PD Controller Design Strategy for Industrial Unstable and Integrating Processes with Dead Time and Inverse Response

PID CONTROL FOR INTEGRATOR AND DEAD TIME PROCESS

A Novel Simplified PID Controller Tuning Method for Exact Maximum Sensitivity Specification

Improved PID controller design for unstable time delay processes based on direct synthesis method and maximum sensitivity

A new PID controller design with constraints on relative delay margin for first-order plus dead- time systems

DS based 2-DOF PID controller for various integrating processes with time delay

PI Design Method Based on Sensitivity

ENHANCED IMC-PID CONTROLLER DESIGN WITH LEAD-LAG FILTER FOR UNSTABLE AND INTEGRATING PROCESSES WITH TIME DELAY

Robust PI-PD Controller Design: Industrial Simulation Case Studies and a Real-Time Application

Centralized Pi/Pid Controller Design for Multivariable Processes

IMC-PID Tuning Method Based on Sensitivity Specification for Process with Time-Delay

An analytical method for PID controller tuning with specified gain and phase margins for integral plus time delay processes

Maximization of Gain/Phase Margins by PID Control

Disturbance Observer based Control of Integrating Processes with Dead-Time using PD controller

PI‐PD controller design for time delay systems via the weighted geometrical center method

New Design Method of PID Controller for Inverse Response Processes with Time Delay