Abstract:Measurement and Control, Ahead of Print. In this paper, controller tuning methods based on stability region centroid methods reported in the literature are used to design PI-PD controllers for unstable, integrating and resonant systems with time delay. By analyzing the stability boundary locus (SBL) for the PD controller, which is utilized in the inner loop of this structure, the controller parameters are obtained using three methods which are the Weighted Geometric Center (WGC), Centroid of Convex Stability Region (CCSR), and Stability Triangle Approach (STA). These techniques were applied analytically, step by step. For the closed loop transfer function obtained in the inner loop of the controlled system, these three methods were utilized to design the PI controller in the outer loop, individually. Unit step responses of the controlled system, using PI-PD gains determined by each method, have been obtained. Furthermore, a disturbance of a certain time and amplitude was added to the systems to test the disturbance rejection behavior and the robustness performance of the methods. Perturbed responses were obtained through changing the model parameters at a certain rate. Time domain performance metrics were analyzed to compare the responses. The simulations were evaluated using settling time, rise time, and percentage overshoot as the assessment criteria. As a result of this study, the effectiveness of three methods, namely WGC, CCSR, and STA, in controller design for unstable, integrating, and resonant time-delay systems has been demonstrated. In addition, a comparison of time domain performance metrics is presented for the nominal and perturbed systems. Based on these comparisons, it is concluded that the methods outperform each other only in some time response performance measures. The presented results showed the advantages of these methods over each other in terms of some performance criteria. The contribution of this study to the literature is the comparative analysis of these three analytical methods.

Optimal PI–PD Controller Design for Pure Integrating Processes with Time Delay

Intelligent Optimization Design of PID Controller for Integrating Processes

Robust PID Tuning Using Closed-Loop Identification

A Developed Method of Tuning PID Controllers with Fuzzy Rules for Integrating Processes.

New PI-PD Controller Design Strategy for Industrial Unstable and Integrating Processes with Dead Time and Inverse Response

Robust PI-PD Controller Design: Industrial Simulation Case Studies and a Real-Time Application

PID CONTROL FOR INTEGRATOR AND DEAD TIME PROCESS

A Proposal on Centralised and Distributed Optimisation Via Proportional-Integral-derivative Controllers (PID) Control Perspective

Maximum sensitivity (Ms)-based I-PD controller design for the control of integrating processes with time delay

PI‐PD controller design for time delay systems via the weighted geometrical center method

An analytical method for PID controller tuning with specified gain and phase margins for integral plus time delay processes

A comparative study on PI-PD controller design using stability region centroid methods for unstable, integrating and resonant systems with time delay

Disturbance Observer based Control of Integrating Processes with Dead-Time using PD controller

Centralized Pi/Pid Controller Design for Multivariable Processes

PID control system analysis, design, and technology

DS based 2-DOF PID controller for various integrating processes with time delay

Design of Discrete-Time Adaptive PID Controllers for a Class of Linear Integrator Systems

Autotuning of a new PI-PD Smith predictor based on time domain specifications

Design of Multivariable PID Control Using Iterative Linear Programming and Decoupling

PID control system analysis and design

The dilemma of PID tuning