Abstract:Objectives . Synthesis and comparative analysis of the extractive distillation flowsheets for aqueous mixtures of solvents utilized in pharmaceutical industries using the example of a methanol−tetrahydrofuran−water system with various compositions. The ternary system contains two minimally boiling azeotropes that exist in a vapor–liquid phase equilibrium. To evaluate the selective effect of glycerol, the phase equilibria of the methanol–tetrahydrofuran–water and methanol–tetrahydrofuran–water–glycerol systems at 101.32 kPa were studied. Methods . The calculations were carried out in the Aspen Plus V.9.0 software package. The vapor–liquid equilibria were simulated using the non-random two-liquid (NRTL) equation with the binary interaction parameters of the software package database. To account for the non-ideal behavior of the vapor phase, the Redlich–Kwong equation of state was used. The calculations of the extractive distillation schemes were carried out at 101.32 kPa. Results . The conceptual flowsheets of extractive distillation are proposed. The flowsheets consist of three (schemes I–III) or four (scheme IV) distillation columns operating at atmospheric pressure. In schemes I and II, the extractive distillation of the mixtures is carried out with tetrahydrofuran isolation occurring in the distillate stream. Further separation in the schemes differs in the order of glycerol isolation: in the third column for scheme I (traditional extractive distillation complex) or in the second column for scheme II (two-column extractive distillation complex + methanol/water separation column). Sсheme III caters to the complete dehydration of the basic ternary mixtures, followed by the extractive distillation of the azeotropic methanol–tetrahydrofuran system, also with glycerol. Sсheme IV includes a preconcentration column (for the partial removal of water) and a traditional extractive distillation complex. Conclusions . According to the criterion of least energy consumption for separation (the total load of the reboilers of distillation columns), sсheme I (a traditional complex of extractive distillation) is recommended. Additionally, the energy expended for the separation of the basic equimolar mixture using glycerol as the extractive agent was compared with that expended using another selective agent: 1,2-ethanediol. Glycerol is an effective extractive agent because it reduces energy consumption, in comparison with 1,2-ethanediol, by more than 5%.

Comparative Analysis of Separation Schemes of Reaction Mixtures of Epichlorohydrin Production in the Presence of Various Solvents

Comparative Analysis of Separation Schemes of Reaction Mixtures of Epichlorohydrin Production in the Presence of Various Solvents

Phase Equilibrium of Reaction Mixtures for the Production of Epichlorohydrin in the Presence of Solvents

SEPARATION OF A MULTICOMPONENT SYSTEM FORMED IN THE PRODUCTION OF EPICHLOROHYDRIN

Design of Epichlorohydrin-Oriented Quaternary System Separation via Hybrid Extraction–Distillation Process

Influence of Operating Conditions on the Hybrid Separation Process Used for C4 Etherified Products

Evaluation and control of energy‐efficient processes for separating epichlorohydrin‐oriented quaternary system

Solvent Screening and Process Optimization for Separating Propylene Oxide from Direct Propylene Epoxidation with H2 and O2

Azeotrope Separation of Ethyl Propionate and Ethanol by Extractive Distillation and Pressure Swing Distillation Method

New Experimental Results and Comparative Analysis of the Efficiency of Separation of Propyl Propionate and Propyl Formate from Propanol Using Deep Eutectic Solvents Based on Choline Chloride

DEVELOPMENT OF SOLVENTS ALCOHOL MIXTURE SEPARATION TECHNOLOGY

Comparison of extractive distillation flowsheets for methanol–tetrahydrofuran–water mixtures

Epoxidation of Allyl Chloride to Epichlorohydrin by a Reversible Supported Catalyst with H2O2 under Solvent-Free Conditions

Comparison of alternative methods for methyl acetate + methanol + acetic acid + acetic anhydride mixture separation

Comparison of Heterogeneous Azeotropic and Pressure-Swing Distillations for Separating the Diisopropylether/isopropanol/water Mixtures

Comprehensive evaluation and comparison of advanced separation methods on the separation of ethyl acetate-ethanol-water highly non-ideal mixture

Synthesis of Epichlorohydrin from 1,3-Dichloropropanol Using Solid Base

Technoeconomic Analysis of the Production of Epichlorohydrin from Glycerol

Optimization and eco-efficiency analysis of extractive distillation processes with different solvents for separating the ternary mixture embedding two azeotropes