Abstract:On the basis of a thermodynamic–topological analysis of phase equilibrium diagrams of reaction mixtures formed during the liquid phase epoxidation of allyl chloride with an aqueous solution of hydrogen peroxide in an organic solvent in the presence of a heterogeneous catalyst, two principal technological separation schemes are proposed. Two lower alcohols are considered as solvents: methanol and propanol-2. Both schemes are aimed at the isolation of all components in pure form and are based on the use of special separation methods: extractive rectification with dimethyl sulfoxide (separation of allyl chloride–methanol and propanol-2–water component pairs) and a combination of rectification and delamination (separation of binary allyl chloride–water and water mixtures–epichlorohydrin). The material balances of separation schemes for mixtures of a specific composition are calculated (one composition for both mixtures is considered). To determine the operation parameters of rectification columns (the number of separation stages, feed plate, and reflux ratio), a computational experiment is conducted using the Aspen Plus® software. Preference is given to parameters ensuring the production of all substances with a purity that meets GOST (State Standard) with minimum energy consumption. The separation scheme of the mixture with propanol-2 containing one column less is characterized by a lower total number of separation stages (by 32 theoretical plates) and lower (by 11%) energy consumption compared to the separation scheme of the mixture with methanol. In addition, the epoxidation reaction with an excess of propanol-2 (the alcohol concentration should be at least 68 wt %) can significantly simplify the allocation of the target product of epichlorohydrin, which is impossible for a system with methanol.

Phase Equilibrium of Reaction Mixtures for the Production of Epichlorohydrin in the Presence of Solvents

Phase Equilibrium of Reaction Mixtures for the Production of Epichlorohydrin in the Presence of Solvents

Comparative Analysis of Separation Schemes of Reaction Mixtures of Epichlorohydrin Production in the Presence of Various Solvents

SEPARATION OF A MULTICOMPONENT SYSTEM FORMED IN THE PRODUCTION OF EPICHLOROHYDRIN

Thermo-regulated Water-Organic Biphasic System for Phenol Catalytic Hydrogenation

Epoxidation of Allyl Chloride to Epichlorohydrin by a Reversible Supported Catalyst with H2O2 under Solvent-Free Conditions

Liquid–Liquid Equilibrium for Systems Containing Epoxidized Oils, Formic Acid, and Water: Experimental and Modeling

Highly selective synthesis of propylene glycol ether from methanol and propylene oxide catalyzed by basic ionic liquid

Selective synthesis of epichlorohydrin via liquid-phase allyl chloride epoxidation over a modified Ti-MWW zeolite in a continuous slurry bed reactor

Synthesis of Epichlorohydrin from 1,3-Dichloropropanol Using Solid Base

Process Intensification of Heterogeneous Dehydrochlorination of Β-Chlorohydrins by Using N-Propanol As Co-Extractant

Design of Epichlorohydrin-Oriented Quaternary System Separation via Hybrid Extraction–Distillation Process

Catalytic Hydroxyethylation of Phenols with Renewable Ethylene Glycol Diester As an Alternative to Ethylene Oxide

Tunable Synthesis of Propylene Glycol Ether from Methanol and Propylene Oxide under Ambient Pressure

Evaluation and control of energy‐efficient processes for separating epichlorohydrin‐oriented quaternary system

ChemInform Abstract: A Magnetically Separable Catalyst for Synthesis of 1‐phenoxy‐2‐propanol Via Atom‐Economic Reaction.

Liquid−Liquid Equilibria for the Epichlorohydrin + Water + Methanol and Allyl Chloride + Water + Methanol Systems

Liquid–Liquid Equilibria for the System Water + 1,3-Dichloro-2-propanol + Epichlorohydrin from (283.2 to 303.2) K

In Situ Generated Micro-Catalytic System for the Epoxidation of Allyl Chloride with Hydrogen Peroxide