Abstract:DEMO-FNS (DEMO Fusion Neutron Source) will be a hybrid reactor designed to combine fusion and fission technologies. In a hybrid reactor the power is mainly produced by a fission blanket which is exposed to the neutron flux generated by confined fusion plasma used as a Fusion Neutron Source (FNS). The steady-state operation of the FNS is easier to achieve as compared to pure fusion reactors, allowing the FNS to be more compact. The DEMO-FNS will produce 40 MW of fusion power. The neutral beam injectors (NBI) are designed to provide a steady state plasma heating, rotation, fueling, current drive and neutron generation in DEMO-FNS. Four injector units will deliver 30 MW power in deuterium with energy E b = 500 keV. The NBI concept and main components are inspired from ITER HNBI design implementing acceleration of negative ions with their neutralization on gas. The high density of injected power in DEMO-FNS leads to a very specific operation scenario with a higher ratio of high-energy ions in the plasma with respect to conventional tokamaks, where the main part of neutron flux will result from fusion between hot-tail ions and relatively cold background. The current drive and neutron yield produced by the tangentially injected beam in a steady-state operation are strongly affected by magnetic configuration and plasma kinetic profiles. The fast ions deposition and performance in plasma are limited by the losses associated with the neutral beam shape and aiming. The main channels of direct beam losses include shine-through losses, as well as fast ion orbital losses. The detailed evaluation of NB parameters and geometry effects is a necessary step of scenario optimization. BTR code (Beam Transmission or, in earlier versions, Beam Transmission with Reionization) is intended for injector beamlines study, and BTR detailed beam model can be also applied to perform a detailed analysis of beam losses and performance in plasma. The analysis of beam in plasma shows the ways towards higher values of beam driven current (NBCD) and neutral yield; the beam-in-plasma behaviour can be tuned for a given tokamak configuration. The NB tracing model workflow is implemented in the BTOR suite (Beam in TORoids). The results for DEMO-FNS are compared with the NBI performance in ITER tokamak, as both machines are beam-driven and implement a similar NBI concept.

Modelling of Neutron Markers for the COMPASS Upgrade Tokamak and Generation of Synthetic Neutron Spectra

Modelling of charge-exchange induced NBI losses in the COMPASS upgrade tokamak

COMPASS Upgrade: a high field tokamak for ITER- and DEMO-relevant research

Installation of the room temperature solid state pellet injector for investigation of runaway electrons at the COMPASS tokamak

Modelling of the NBI contribution to the neutron energy spectra for the ITER Vertical Neutron Camera

Synthetic Nuclear Diagnostics for Inferring Plasma Properties of Inertial Confinement Fusion Implosions

Post-Disruptive Runaway Electron Beam in COMPASS Tokamak

The impact of neutral beam parameters on current drive and neutron yield in DEMO-FNS tokamak

Neutronics simulations for the design of neutron flux monitors in SPARC

Velocity-space sensitivity of the compact neutron emission spectrometers at EAST

Development of Neutronic Model of Hybrid DEMO-FNS Reactor by Means of NESTOR Code and Monte Carlo Method

Neutron Emission Spectrometer To Measure Ion Temperature On The Fusion Demonstration Plant

Validation of Thin-foil proton recoil neutron spectrometer prototype for application in high yield DT fusion devices

A multichannel interferometer for electron density measurements in COMPASS

OVERVIEW OF NEUTRON MEASUREMENTS IN JET FUSION DEVICE

Innovative approaches to neutron beam optimization: A case study of FP14 at LANSCE

A compact stilbene crystal neutron spectrometer for EAST D-D plasma neutron diagnostics.

Kinetic Modeling of Seeded Nitrogen in an ITER Baseline Scenario

Diagnosing NB Plasmas on the EAST Tokamak with New Time-of-flight Neutron Spectrometer

Design and Simulated Performance of a High-Resolution Magnetic Proton Recoil Spectrometer for Deuterium–tritium Neutrons

COMPASS Calorimetry in view of future plans