Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

Manipulation of Crystallization Kinetics for Perovskite Photovoltaics Prepared Using Two-Step Method

Review of Two‐Step Method for Lead Halide Perovskite Solar Cells

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Crystallization Dynamics of Sn‐Based Perovskite Thin Films: Toward Efficient and Stable Photovoltaic Devices

Root cause for the difference in photovoltaic parameters of perovskite solar cells prepared by one- and two-step processes

Scalable Two‐Step Production of High‐Efficiency Perovskite Solar Cells and Modules

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Rational Strategies to Improve the Efficiency of 2D Perovskite Solar Cells

Comparison of processing windows and electronic properties between CH3NH3PbI3 perovskite fabricated by one-step and two-step solution processes

Manipulating the crystallization kinetics of halide perovskites for large-area solar modules

In-depth understanding of ionic liquid assisted perovskite film formation mechanism for two-step perovskite photovoltaics

Reaction‐Diffusion and Crystallization Kinetics Modulation of Two‐Step Deposited Tin‐Based Perovskite Film via Reducing Atmosphere

Controlling the Crystallization Kinetics of Lead‐Free Tin Halide Perovskites for High Performance Green Photovoltaics

Improving Crystallization and Stability of Perovskite Solar Cells Using a Low-Temperature Treated A-Site Cation Solution in the Sequential Deposition

Recent Progress of Thin Crystal Engineering for Perovskite Solar Cells

3‐Hydrazinylpyridine Hydrochloride Regulating Crystallization Kinetics of Tin‐Lead Perovskite Prepared by Two‐Step Method

Recent Advances in CsPbX3 Perovskite Solar Cells: Focus on Crystallization Characteristics and Controlling Strategies

Synthesis of Hybrid Lead Iodide Perovskite Thin Film by Two-Step Method Modified with a Double Dipping Circle to Control Its Crystallization and Morphology to Improve Solar Cells’ Performance

Advances in Crystallization Regulation and Defect Suppression Strategies for All-inorganic CsPbX3 Perovskite Solar Cells

Crystallization Kinetics of Hybrid Perovskite Solar Cells

Fabrication Strategies for High Quality Halide Perovskite Films in Solar Cells