Abstract:In this study, a novel low‐cost ceramic membrane was successfully produced using the extrusion method by mixing zeolite with smectite clay. This sustainable membrane exhibits excellent properties, including a favorable microstructure, high water permeability, and significant reductions in chemical oxygen demand, hardness, and color in treated pulp paper wastewater and colored solutions. The selected membrane demonstrated high mechanical resistance (65 MPa) and was regenerated using an ultrasonic process to prevent irreversible fouling after filtration. Low‐cost separation techniques are crucial for treating wastewater. Developing inexpensive membranes made from natural materials has become a popular research area in recent years. Tubular membranes were produced by adding 10% organic additives to a mixture of 80% zeolite and 10% smectite. New composite ceramic membranes from zeolite and smectite were prepared using the extrusion method to create a plastic paste and characterized using XRD, SEM, EPMA, and FTIR. The impact of sintering temperature (Tsint, 850–950 °C) on membrane properties, such as microstructure, mechanical strength (MS), water permeability, and filtration performance, was investigated. The MS and shrinkage rate increased with Tsint. At 950 °C, the resulting composite membrane exhibited a high MS of over 65 MPa, a relatively low porosity of 30%, appropriate for membrane filtration, and a water permeability of 65 L·h−1·m−2·bar−1. When applied to remove pollutants from wastewater, this membrane demonstrated a high color retention of 98.4% from an aqueous Evans blue‐colored solution (Effluent 1). For extensive application to wastewater treatment, this membrane showed a high‐efficiency level for treating real effluent produced by the pulp industry, removing 62.4% of chemical oxygen demand, 36% of hardness, and 82% of color. Finally, an ultrasonic cleaning procedure allowed the restoration of 70% of the initial permeability after four cycles for both effluents. Thanks to the exciting properties offered by these membranes and their competitive cost of less than $ 20·m−2, these membranes are appropriate for treating industrial wastewater.

Treatment of starch‐rich wastewater using fly ash‐based low‐cost tubular ceramic membrane

Treatment of food processing industries wastewater using a novel Fuller's earth clay-based tubular ceramic membrane.

Characterization and application of novel fly ash blended ceramic membrane in MFC for low-cost and sustainable wastewater treatment and power generation

Treatment of food processing industries wastewaters using a new clay-based inorganic membrane: Performance evaluation and fouling analysis

Extrusion of Silicon Carbide Based Tubular Membrane Incorporated With Coal Fly Ash and Performance Evaluation in Water Treatment

Development of low-cost ceramic membranes from industrial ceramic for enhanced wastewater treatment

Application of coal fly ash based ceramic membranes in wastewater treatment: A sustainable alternative to commercial materials

Insights on applications of low-cost ceramic membranes in wastewater treatment: A mini-review

Utilization of Ultrafiltration Technology in the Treatment of Sweet Potato Starch Production Wastewater

Fabrication and characterization of ceramic tubular composite membranes using slag waste materials for oily wastewater treatment

Developing PVDF Hollow Fiber Membrane Enhanced by Braided Tube and Modified by Bionic Coating for Treating Aldehyde-Containing Wastewater

Cost-Effective Utilisation of Industrial Fly Ash Waste in Treatment of Domestic Wastewater

Evaluation of fuller's earth clay ceramic membrane in treating raw rubber-processing wastewater

Effectiveness of carbon polymeric nanofiltration composite membrane in treating industrial textile wastewater

Manufacture and optimization of low-cost tubular ceramic supports for membrane filtration: application to algal solution concentration

Co-pressing and co-sintering preparation of cost-effective and high-performance asymmetric ceramic membrane for oily wastewater treatment

Treating waste with waste: Treatment of textile wastewater using upcycled food waste as a pore-forming agent in the fabrication of ceramic membranes employing DOE/FFD design

Fouling behaviour of industrial waste-based ceramic membrane in anaerobic membrane bioreactor treating low strength wastewater

Fabrication of conductive ceramic membranes for electrically assisted fouling control during membrane filtration for wastewater treatment

Characterization and Mitigation of the Fouling of Flat-Sheet Ceramic Membranes for Direct Filtration of the Coagulated Domestic Wastewater

Preparing Sustainable Membranes Made From Zeolite–Smectite for Treating Textile Wastewater and Pulp Industry Wastewater