Abstract:A grating-assisted temperature-insensitive micro-ring resonator bio-sensor is reported using finite-difference time domain simulation method. In addition to choosing a negative thermo-optic coefficient material water to nullify temperature-induced wavelength shift, optimization of the opto-geometric parameters provided a precisely zero-temperature sensitivity state of the structure. The negative thermo-optic coefficient of water counterbalances the positive shift in resonance wavelength originating from Si waveguides. The grating structure delocalizes the core field into the analyte region, which enhances field matter interaction to offer high bulk refractive index (RI) and affinity sensing. The advantage of incorporating grating structure in the ring has been demonstrated by comparing the bulk RI sensitivity and affinity sensitivity with and without the grating structure. Without the circular grating array, the bulk RI sensitivity is 214 nm/RIU and the affinity sensitivity is 0.139 nm/nm. Using grating in the ring structure offers an improved bulk RI sensitivity of 525 nm/RIU and an adlayer sensitivity of 0.515 nm/nm. We calculated the system limit of detection of the structure as ∼2×10−6 RIU. The fabrication tolerance of geometrical parameters, in the form of 10% variation in hole radius and 5% variation in other widths of our sensor, reveals a nominal temperature sensitivity of ∼6 pm/◦C. Changing the cladding analyte from pure water to other aqueous solutions, e.g. urine samples, also has a small impact on temperature sensitivity. The present work is useful in RI-dependent monitoring of the constituents present in aqueous medium-based bio-analytes samples in a variable ambient temperature environment.

Temperature insensitive large free spectral range micro-ring resonator

Grating assisted temperature insensitive micro-ring resonator biosensor

Temperature-insensitive Waveguide Sensor Using a Ring Cascaded with a Mach-Zehnder Interferometer

Thermo-Optical Tuning Cascaded Double Ring Sensor With Large Measurement Range

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Silicon waveguide-based single cavity Fano resonance temperature sensor

Sensitive Birefringent Temperature Sensor Based on a Waveguide Ring Resonator.

Temperature-insensitive optical sensors based on two cascaded identical microring resonators

Optical Sensors Based on Cascaded Micro-Ring Resonators with Thermo-Optical Tuning

Thermal-optic Tuning Cascaded Double Ring Optical Sensor Based on Wavelength Interrogation

Doubled Temperature Measurement Range for A Single Micro-Ring Sensor

Wide-range Optical Sensors Based on a Single Ring Resonator with Polarization Multiplexing

Design and analysis of an elliptical-shaped ring resonator for photonic crystal temperature sensing

Temperature Characteristic of Ring Resonator in Polarization Maintaining Silica Optical Waveguide

Optical Multi-ring Cascade Cavity Temperature Sensor with Ultra-High Sensitivity

Temperature Sensor Cascading Reflective Fabry-Perot Cavity with Microring Resonator

Micro-ring Resonator Optical Sensor Based on Silicon and Silicon Nitride Waveguide

Temperature-insensitive Waveguide Sensor Based on Vernier-effect

Self-Referenced Temperature Sensors Based on Cascaded Silicon Ring Resonator

Double Ring Nanostructure with an Internal Cavity and a Multiple Fano Resonances System for Refractive Index Sensing.