Abstract:Phosphogypsum is an industrial waste generated in the production of fertilizers causing environmental problems. Calcined phosphogypsum (CPG) is obtained by low-temperature calcination and dehydration of phosphogypsum. CPG is mainly used to produce building materials. However, mechanical strength properties and water resistance of CPG materials is extremely poor, which leads to its relatively low utilization rate in construction industry. To address this issue, various amount of Ordinary Portland cement (OPC), fly ash (FA), rice husk (RH) and modified admixtures (AD) were mixed with the CPG to obtain CPG-based composite cementitious materials, which enhanced the water resistance and mechanical strength of the corresponding hardened materials. The influence of different contents of cement on the setting time, hydration heat, hydration products, mechanical properties, water absorption, heavy metal leaching and deterioration coefficient of the composite cementitious material is investigated. The results showed that the optimal mixing ratio of CPG: OPC: FA: RH was 57: 20: 10: 13 considering the water resistance and mechanical strength properties of CPG-based composite cementitious materials. On these conditions, the compressive strength, the flexural strength, water absorption and deterioration coefficient of the specimens at 28 days are 6.1 MPa, 4.6 MPa, 29.4% and 0.66 respectively, which were in line with the national standard of phosphorus building gypsum wallboard. It was demonstrated that two skeleton types are present in the samples prepared using CPG-based composite cementitious materials, which had a synergistic support effect on the structure. The first skeleton was formed by gypsum dihydrate crystals (CaSO 4 ·2H 2 O) and provided strength to the specimens at an early stage, while the second skeleton was formed by ettringite (AFt) and C–S–H gels, which provided strength at a later stage. The skeletons make the hardened materials denser and more waterproof. Moreover, the composite materials exhibited a positive solidification effect on heavy metals present in CPG.

Effect of Synergistic Modification of Building Materials Based on α-Hemihydrate Phosphogypsum by Portland Cement/H-PDMS on Water Resistance

The effects of admixtures on the durability properties of phosphogypsum-based cementitious materials

Effect of calcium sulphoaluminate cement on mechanical strength and waterproof properties of beta-hemihydrate phosphogypsum

Study on the Mechanical Properties, Microstructure and Hydration Mechanism of Phosphogypsum-Based Geopolymer Cement with Added Micron-Sized Silica Particles

Synthesis of reticular long-carbon-chain polysiloxane and its hydrophobic modification of phosphogypsum-based materials

Improving the mechanical property and water resistance of β-hemihydrate phosphogypsum by incorporating ground blast-furnace slag and steel slag

Low-Energy Consumption Preparation of Fine Waterproof Cementitious Material with High-Volume Phosphogypsum

Effect of amorphous aluminum hydroxide on the phosphogypsum-based cementitious materials in prefabricated building field

Improvement of the mechanical properties of beta-hemihydrate phosphogypsum by incorporating wet-ground low-calcium fly ash slurries

Influence of cement on properties of calcined phosphogypsum based composite cementitious materials

An investigation on the anti-water properties of phosphorus building gypsum (PBG)-based mortar

Development and optimization of phosphogypsum-based geopolymer cement

Effects of phosphogypsum on hydration properties and strength of calcium aluminate cement

Study on the improvement of the waterproof and mechanical properties of hemihydrate phosphogypsum-based foam insulation materials

Study on the hydration and properties of multiphase phosphogypsum synergistically activated by sodium sulfate and calcium sulfate whisker

A Sustainable Composite Cementitious Material Manufactured by Phosphogypsum Waste

Study on physical and chemical characteristics of β-hemihydrate phosphogypsum

Improving mechanical properties of hemihydrate phosphogypsum via alkali-activated mineral admixtures

Green and Sustainable Superhydrophobic Phosphogypsum Mortar Coating with Self-Cleaning Properties and Water Resistance