Abstract:Sludge conditioning by the Fenton process can effectively reduce sludge water content. The Fenton process has ideal dewaterability at different initial pH levels. However, the difference in the initial pH levels can lead to variations in conditioner dosage, resulting in different environmental impacts and economic pressures. This study provides insights into the role of the life cycle linked response surface methodology (LC-RSM) framework in revealing optimal solutions with both environmental and economic performance in different combinations of conditioners. Response surface methodology (RSM) was used to construct a model of sludge dewatering by the Fenton process, and life cycle assessment and life cycle cost were used to quantify the environmental and economic performance of all conditioning solutions in the model. The LC-RSM optimization solution was 6%–68% and 15%–70% lower than the RSM recommended solution in terms of environmental impacts and economic costs, respectively. For specific impact categories, such as global warming potential, the LC-RSM optimization solution was 19%–56% lower than the RSM recommended solution. In addition, the total environmental impact of the different conditioner combinations ranged between 4.1 and 7.8 Pt and 3.2–6.7 Pt at 53% and 58% of the sludge target water content, respectively. Surprisingly, the environmental impact of the solution with superior dewatering performance (53%) was lower than that of the solution with poor dewatering performance (58%) in many cases. The above results show that the LC-RSM optimization solution has better environmental and economic performance compared to RSM. In addition, the environmental impacts and economic costs of different solutions with the same water content target vary widely, which may lead to comparing sludge conditioning procedures with different targets in an unfair environment. Therefore, a unified platform for comparison is needed, and LC-RSM can provide support. This study can assist decision-makers in identifying the best solution for both environmental and economic performance in a multivariate system and stimulate further discussion on how to compare different processes on a more uniform platform.

A comparative life cycle assessment (LCA) analysis of innovative methods employing cutting-edge technology to improve sludge reduction directly in wastewater handling units

Life cycle assessment of anaerobic-anoxic-oxic and extended aeration of the activated sludge treatment system for urban wastewater treatment: a case study in Iran

Sustainability analysis of implementing sludge reduction in overall sludge management process: Where do we stand?

Life cycle assessment of deploying sludge minimization with (sulfidogenic-)oxic-settling-anaerobic configurations in sewage-sludge management systems

Life Cycle Assessment and Life Cycle Cost of Sludge Dewatering, Conditioned with Fe 2+ /H 2 O 2 , Fe 2+ /Ca(ClO) 2 , Fe 2+ /Na 2 S 2 O 8 , and Fe 3+ /CaO Based on Pilot-Scale Study Data

LCA of municipal wastewater treatment

Life Cycle Assessment of a Domestic Wastewater Treatment Plant Simulated with Alternative Operational Designs

Life cycle assessment approach to sustainable sewage sludge management for water pollution control

Environmental life cycle assessment of treatment and management strategies for food waste and sewage sludge

Environmental and economic life cycle assessment of emerging sludge treatment routes

Biological Wastewater Treatment by A Bioreactor with Repeated Coupling of Aerobes and Anaerobes Aiming at On-Site Reduction of Excess Sludge

Environmental impact and economic benefit evaluation of sewage sludge treatment technologies

Environmental, energy, and economic impact assessment of sludge management alternatives based on incineration

Combined Life Cycle Environmental and Exergetic Assessment of Four Typical Sewage Sludge Treatment Techniques in China

Comprehensive evaluation of sewage sludge anaerobic digestion process with different digestate treatments

The application of Life Cycle Assessment (LCA) to anaerobic technologies for the treatment of municipal wastewater: A review

Biological wastewater treatment: a comprehensive sustainability analysis using life cycle assessment

Life cycle assessment of alternative pulp mill sludge treatment methods in Finland

Revealing the best solution simultaneously for environmental and economic performance using response surface methodology under the perspective of life cycle: A case study of sludge dewatering by the Fenton process

Synergism of Life Cycle Assessment and Sustainable Development Goals Techniques to Evaluate Downflow Hanging Sponge System Treating Low-Carbon Wastewater

Life Cycle Assessment of Sewage Sludge Treatment: Comparison of pyrolysis with traditional methods in two Swedish municipalities