Abstract:In order to ease the manufacture process of very large permanent magnet (PM) machines, such as direct drive wind power generators, modularity technique is usually adopted. Although conventional fractional slot PM machines with all teeth wound windings show good performance, the coils located at the end part of each segment could be easily damaged because of being exposed to the air. In addition, the local winding faults could easily proliferate to the whole machine due to the physical touch of adjacent coils. Thus, a novel modular fractional slot PM machine with redundant teeth is proposed in this paper, while three phases within each set of winding are still balanced. The construction of the proposed modular PM machine having 42-slots/32-poles (42S/32P) combination is described in detail as an example, which can be treated as the integration of six 6S/5P segments and a redundant 6S/2P machine. The reason for using 6S/2P machine is to get rid of the undesirable unbalanced magnetic force (UMF), which usually exists in rotating asymmetric machines, such as 3S/2P PM machine. Since the end part of each segment in the proposed modular PM machine can be covered by half redundant tooth during the production, more protection can be provided for coils located in these regions. Furthermore, the separation of six segments can improve the fault-tolerant capability of the machine. The electromagnetic performance predicted by finite-element analysis (FEA) also demonstrates that the proposed modular machine will perform better if dual three-phase winding is adopted. Finally, the experiments on the prototyped machine validate the analysis in the paper.

Magnet Slotting Design to Reduce High Order Electromagnetic Force and Vibration of Permanent Magnet Motor

Influence of slot and pole number combination on radial force and vibration modes in fractional slot PM brushless machines having single- and double-layer windings

Design Optimization and Performance Investigation of Linear Doubly Salient Slot Permanent Magnet Machines

Simple and accurate analytical estimation of slotting effect on magnet loss in fractional-slot surface-mounted PM machines

Investigation of Electromagnetic Forces Acting on Rotor Considering Modulation Effect of Surface-Mounted Pole Structure

Novel Modular Fractional Slot Permanent Magnet Machines with Redundant Teeth

Analysis and Reduction of Detent Force in Permanent Magnet Linear Synchronous Motor

Design to reduce electromagnetic vibration in integral-slot SPM machine considering force modulation effect

Analysis and reduction of electromagnetic vibration in integral-slot PM machine by functional magnet structure

Detent Force Analysis and Optimization of Permanent Magnet Linear Synchronous Motor

Modulated Vibration Reduction Design for Integral-Slot Interior Permanent Magnet Synchronous Machines

Detent-Force Analysis and Reduction of Modular Permanent-Magnet Linear Synchronous Motors with Non-overlapping Windings

Design and Analysis of a 500W 120000rpm High-Speed Permanent Magnet Motor

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor

Vibration of permanent magnet synchronous motor with different slot-pole combinations and winding layers

NVH Optimization Analysis of Permanent Magnet Synchronous Motor by Rotor Slotting

Slot/Pole Number Combination Research of-PM Linear Motors With Fractional Slots per Pole

Design Consideration of Fractional Slot Concentrated Winding Interior Permanent Magnet Synchronous Motor for EV and HEV Applications

Design of a Chamfered Structure on Consequent-Pole Vernier Permanent-Magnet Machine

Vibration Reduction by Magnetic Slot Wedge for Rotating Armature Permanent Magnet Motors

Vibration Suppression of FSCW-IPM with Auxiliary Slots