Abstract:Developing efficient supports for transition-metal nanoparticles (M-NPs) to prevent their agglomeration and to facilitate their handling and recycled use has been a constant objective. Herein, porous polyurea (PPU) is prepared by simple precipitation polymerization of toluene diisocyanate through its reaction with water in water–acetone, followed by Pd(OAc)2 immobilization on a PPU surface to get Pd(OAc)2@PPU and by Pd(OAc)2 reduction to get a hybrid composite with Pd-NPs on a PPU surface. Multiple characterizations revealed that the porous structure of PPU was retained in Pd(OAc)2@PPU and Pd NPs were well dispersed on the surface with a mean diameter of 7.18 nm. was used as catalyst for reduction of toxic hexavalent chromium Cr(VI) to benign trivalent chromium with formic acid as the reducer. A higher catalytic performance was detected compared to that of reported heterogeneous catalysts under similar conditions. A slight decrease in catalytic activity was detected in recycled use of the catalyst, which is ascribed to CO poisoning, a byproduct in formic acid decomposition. Full regeneration was obtained by heating the catalyst under N2 atmosphere for 2 h at 180 °C. This work provides therefore a novel approach for the preparation of a catalyst of high performance for Cr(VI) reduction, featured by low cost, facile synthesis, easy handling, and reusability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.1c01376?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.1c01376</a>.Experimental section; UV–vis absorbance spectra of Pd(OAc)2 solution, Pd(OAc)2 loading rate, and Pd(II) loaded on PPU; XRD diffractograms, FTIR and 13C NMR spectra of PPU, Pd(OAc)2@PPU, and ; TEM images of and ; sizes of Pd-NPs in ; UV–vis absorbance of supernatant in Cr(VI) reduction with replaced by Pd(OAc)2@PPU, and those in the presence of without FA; UV–vis spectra and pH of K2Cr2O7 solution in the presence of different chemicals; reduction of Cr(VI) with different initial concentrations; gas generated by dehydrogenation of FA; chemisorption results of Pd-NPs in and ; reusability of in Cr(VI) reduction; test of Pd leaching from ; XRD diffractograms and TEM images of after six recycled uses and that of the regenerated; UV–vis spectra in Cr(VI) reduction with pretreated with H2, CO2, and CO; catalytic activity of regenerated at different time.This article has not yet been cited by other publications.

Pd-functionalized polydopamine-coated polyurethane foam: a readily prepared and highly reusable structured catalyst for selective alkyne semi-hydrogenation and Suzuki coupling under air

A Conveniently Synthesized Polyethylene Gel Encapsulating Palladium Nanoparticles As A Reusable High-Performance Catalyst For Heck And Suzuki Coupling Reactions

Covalent organic framework-supported Pd nanoparticles: An efficient and reusable heterogeneous catalyst for Suzuki-Miyaura coupling reactions

Palladium Immobilized on a Polyimide Covalent Organic Framework: An Efficient and Recyclable Heterogeneous Catalyst for the Suzuki–Miyaura Coupling Reaction and Nitroarene Reduction in Water

Ultra-small PdAuIr nanoparticles on amine-functionalized porous organic polymers for efficient dehydrogenation from FA at room temperature

Palladium supported on pyrrole functionalized hypercrosslinked polymer: Synthesis and its catalytic evaluations towards Suzuki-Miyaura coupling reactions in aqueous media

EDTA-functionalized metal–organic framework of TMU-16-NH2 decorated with Pd nanoparticles as an efficient and effective nanocatalyst in the Suzuki – Miyaura coupling reaction

Nanoporous Phenanthroline Polymer Locked Pd As Highly Efficient Catalyst for Suzuki‐Miyaura Coupling Reaction at Room Temperature

Palladium-Functionalized Polysiloxane Drop-Casted on Carbon Paper as a Heterogeneous Catalyst for the Suzuki–Miyaura Reaction

Porous Polyurea Supported Pd Catalyst: Easy Preparation, Full Characterization, and High Activity and Reusability in Reduction of Hexavalent Chromium in Aqueous System

Anchoring of Palladium (II) in Functionalized SBA-16: an Efficient Heterogeneous Catalyst for Suzuki Coupling Reaction

Engineering ultrafine Pd clusters on laminar polyamide: A promising catalyst for benzyl alcohol oxidation under air in water

Palladium nanoparticles on polydimethylsiloxane film for C−C coupling reactions, and catalytic reduction of organic pollutants in water

Selective Cu4Pd alloy nanoparticles anchoring on amine functionalized graphite nanosheets and their use as reusable catalysts for a C-C coupling reaction with the sacrificial role of Cu for Pd-regeneration

Mesoporous α-Al 2 O 3 -supported PdCu bimetallic nanoparticle catalyst for the selective semi-hydrogenation of alkynes

2-Aminopyridine functionalized cellulose based Pd nanoparticles: An efficient and ecofriendly catalyst for the Suzuki cross-coupling reaction

Preparation and Reactivation of Heterogeneous Palladium Catalysts and Applications in Sonogashira, Suzuki, and Heck Reactions in Aqueous Media

Pd Nanoparticles Capped with [cppd(ii)cl]2 Complexes for Hydrogenation and Acid-Free Acetalization of Α,β-Unsaturated Aldehydes

Palladium Nanoparticles Supported on A Porous Organic Polymer: an Efficient Catalyst for Suzuki-Miyaura and Sonogashira Coupling Reactions

A Recyclable Self-Supported Nanoporous PdCu Heterogeneous Catalyst for Aqueous Suzuki-Miyaura Cross-Coupling.

Amphiphilic Dendronized Copolymer-Encapsulated Au, Ag and Pd Nanoparticles for Catalysis in the 4-Nitrophenol Reduction and Suzuki–Miyaura Reactions