Abstract:Organofunctional silanes are important surfactants capable of forming functional nanolayers on mineral surfaces, which can strengthen the interaction (adhesion) between the inorganic material (glass, silicon dioxide, carbon, etc.) and polymer (a binder in composites or a polymer coating); in the case of metal surfaces, the surfactants can inhibit metal corrosion. Articles devoted to the adsorption of organosilanes on metal surfaces under different conditions are reviewed. It is shown that organosilanes can be adsorbed onto the surface and form both mono- and polymolecular adsorption layers with a thickness of up to several hundred nanometers, which depends on the conditions of layer deposition. It is shown that the first monolayer on the freshly deposited aluminum surface is adsorbed irreversibly because of the polymolecular adsorption of ethoxysilanes from the vapor phase, and the adsorption bonds are of van der Waals nature. The isotherm of silane adsorption is described by the Langmuir and BET equations. The energy of the adsorption of silanes and the energy of landing pads of individual molecules, which are determined from the literature, are given. It is established that covalent bonds between silanes and aluminum (Al–O–Si) are formed on the metal surface in the presence of adsorbed water, while modification of a metal deposited from an aqueous solution with organosilanes leads to multilayer adsorption of triethoxysilanes. It is shown that silane (silanol and siloxane) molecules displace adsorbed water from the surface of freshly deposited aluminum when they adsorb chemically on it and form the surface layer from siloxane oligomers, which is capable of inhibiting the hydration of the metal-oxide film and, as a result, can slow down the processes of metal corrosion. The information about the effect of organosilicon surface layers on the adhesion of the polymer coating deposited on the surface of aluminum and data on the resistance of the adhesion of a coating to the influence of water are given. Both mechanisms of promoting the dry adhesion of an epoxy coating on the surface of aluminum and increasing the adhesion resistance of epoxy to water are clarified. The results of studying the adsorption of organosilanes from an aqueous solution onto the surfaces of aluminum, zinc, and iron by the method of piezoquartz nanoweighing are given. The following adsorption isotherm approaches known from the literature are used to interpret the adsorption data: the Langmuir, BET, Flory–Huggins, multisite Langmuir, Temkin, Frumkin, and Freindlich approaches. It is shown that silanes displace adsorbed water from a metal surface during adsorption and occupy from two-and-a-half (on the surface of aluminum) to more than six (on the surface of zinc) adsorption sites on the metal surface. The surface orientation of adsorbed molecules is determined. The heats of adsorption of silanes, which are calculated by various methods, are given. It is shown that silanes are adsorbed on metal surfaces by forming chemical bonds and that organosilanes and corrosion inhibitors can adsorb jointly on the metal surface. Analysis of the literature on the use of mixtures of silanes and corrosion inhibitors shows that the treatment of a metal surface with mixtures of organosilanes and corrosion inhibitors gives rise to the formation of a surface layer with a chemical structure different from that of the layers obtained by the treatment of the surface with solutions containing individual components of the mixture, which effectively inhibits the corrosion of metal under the coating and substantially increases the adhesion of the coating to the metal, even under the conditions of high humidity.

Adsorption of Organosilanes on the Surface of Inorganic Materials: 2. Adsorption on the Surface of Metals

Understanding the Role of Silane Pretreatments in an Organic Coating System. Part 1: Corrosion Performance and Interfacial Property

Electrochemical Behavior of Steel Coated with Organosilicon Self-Organizing Layers

CATHODICALLY ELECTROCHEMICAL-ASSISTED DEPOSITION AND PROTECTIVE PROPERTIES OF SILANE FILMS

Understanding the Role of Silane Pretreatments in an Organic Coating System. Part 2: a Study of Molecular Dynamics Simulation

Electrodeposited Silica Films Post-Treated with Organosilane Coupling Agent As the Pretreatment Layers of Organic Coating System

Stability of Octadecyltrimethoxysilane-Based Coatings on Aluminum Alloy Surface

Arrangement of Monofunctional Silane Molecules on Silica Surfaces: Influence of Alkyl Chain Length, Head-Group Charge, and Surface Coverage, from Molecular Dynamics Simulations, X-ray Photoelectron Spectroscopy, and Fourier Transform Infrared Spectroscopy

Fabrication of silane-based surface coating with Ag/TiO 2 hybridization and its anti-corrosion performance on metal surface

Fabricating Superhydrophobic and Oleophobic Surface with Silica Nanoparticles Modified by Silanes and Environment-Friendly Fluorinated Chemicals

Improved Corrosion Protection of Aluminum Alloys by Electrodeposited Silanes

Preparation of dense modified nanosilica superhydrophilic coatings on aluminum alloy surfaces by adjusting amino groups

Superhydrophobic Self-Assembled Silane Monolayers on Hierarchical 6082 Aluminum Alloy for Anti-Corrosion Applications

Trilaminar Structure Hydrophobic Graphene Oxide Decorated Organosilane Composite Coatings for Corrosion Protection

The Assembly of Silicalite-1 Layer on Open Cell Aluminum Foam and Its Corrosion Resistance

Electrochemical and mechanical properties of superhydrophobic aluminum substrates modified with nano-silica and fluorosilane

The Synergistic Effects of Aminosilane Coupling Agent on the Adhesion Performance of Silane Primer for Silicone Resin Thermal Protection Coating

Determination of the constants of affinity of FeCl3, CuCl2, and ZnCl2 for a nitrogen-containing organosilane bonded on Al2O3-cellulose acetate hybrid material surface from ethanol solution

Electrodeposition of silane films on aluminum alloys for corrosion protection

PROGRESS IN ANTI-CORROSIVE TREATMENT OF METALS BY SILANIZATION