Abstract:Abstract The behaviour of concrete in fire depends on its mix proportions and constituents and is determined by complex physicochemical transformations during heating. Normal‐strength concretes and high‐performance concretes microstructurally follow similar trends when heated, but ultra‐high‐performance concrete behaves differently. A key property unique to concrete amongst structural materials is transient creep. Any structural analysis of heated concrete that ignores transient creep will yield erroneous results, particularly for columns exposed to fire. Failure of structural concrete in fire varies according to the nature of the fire; the loading system and the type of structure. Failure could occur from loss of bending or tensile strength; loss of bond strength; loss of shear or torsional strength; loss of compressive strength; and spalling of the concrete. The structural element should, therefore, be designed to fulfil its separating and/or load‐bearing function without failure for the required period of time in a given fire scenario. Design for fire resistance aims to ensure overall dimensions of the section of an element sufficient to keep the heat transfer through this element within acceptable limits, and an average concrete cover to the reinforcement sufficient to keep the temperature of the reinforcement below critical values long enough for the required fire resistance period to be attained. The prediction of spalling – hitherto an imprecise empirical exercise – is now becoming possible with the development of thermohydromechanical nonlinear finite element models capable of predicting pore pressures. The risk of explosive spalling in fire increases with decrease in concrete permeability and could be eliminated by the appropriate inclusion of polypropylene fibres in the mix and/or by protecting the exposed concrete surface with a thermal barrier. There are three methods of assessment of fire resistance: (a) fire testing; (b) prescriptive methods, which are rigid; and (c) performance‐based methods, which are flexible. Performance‐based methods can be classified into three categories of increasing sophistication and complexity: (a) simplified calculations based on limit state analysis; (b) thermomechanical finite element analysis; and (c) comprehensive thermohydromechanical finite element analysis. It is only now that performance‐based methods are being accepted in an increasing number of countries.

Effect of bulk density on flame resistance of rockwool in combined fire-resistant facings

Experimental Study on Fire Resistance Performance of Concrete-Filled Steel Plate Composite Walls

Fire Resistance of Foamed Concrete for Discontinuous Partition Filling

The Effect of Intumescent Coating Containing Expandable Graphite onto Spruce Wood

A review on cement-based materials used in steel structures as fireproof coating

The Effect of Expanded Vermiculite on the Fire Resistance of Waterborne Acrylic Coatings

Numerical Analysis of Combined Effect Hybrid Fibres and Fire Insulation on the Fire Resistance Performance of SCC Beams

Effect of Expandable Graphite Flakes on the Flame Resistance of Oak Wood

Enhancing Fire Resistance of Geopolymers Modified with Thermal Insulation Additives

Fire-resistive performance of intumescent flame-retardant coatings for steel

Small-scale experimental study on EPS ETICS and flame-retardant coating reaction-to-fire performance

Enhancing the fire resistance of light gauge steel framed floor-ceiling systems through external insulation

Fire Resistance of Circular Concrete-Filled Steel Tubular (CFST) Column Protected by Intumescent Coating

Fire Performance of EPS ETICS Facade: Effect of Test Scale and Masonry Cover

Fire Resistance Behavior of Full-scale Self-thermal Insulation Sandwich Walls Made of Textile-reinforced Concrete

Size is not all that matters: Residue thickness and protection performance of intumescent coatings made from different binders

Enhanced Resistance to Fire of the Bark-Based Panels Bonded with Clay

Ensuring fire safety: compliance tests for the use of polystyrene foam in facades systems

Fire safety study of a perlite concrete chimney and wooden ceilings used in buildings based on experimental tests and CFD analysis

The Effect of Multilevel Carbon Reinforcements on the Fire Performance, Conductivity, and Mechanical Properties of Epoxy Composites

Effect of fire on concrete and concrete structures