Abstract:Ultrahigh performance concrete (UHPC) is a cement-based material with superior characteristics including tension strain-hardening and multi-cracking, which is attractive for application in the field of assembled structures. However, a reliable method for simulating the mechanical behaviour of UHPC structures is lacking. Thus, this study proposes a two-dimensional fixed crack constitutive model for UHPC using the MSC.MARC software based on the experimental results, which is expected to offer high reliability. The stirrup restraint effect, tensile strength hardening, stiffness degradation, and the tension–compression softening of UHPC were considered in the constitutive model. To calibrate the relevant parameters of the constitutive model, UHPC prism and dog-bone specimens with different steel fibre contents were fabricated. Through uniaxial compressive and tensile tests with different loading regimes, the effects of steel fibre content, maintenance mode, and the loading regime on the uniaxial mechanical properties of UHPC were analysed. The test results showed that the peak compressive strain of the specimen with 2% steel fibre content was significantly higher than those of the specimens with 1% and 3% steel fibre content. Furthermore, UHPC exhibits strain hardening and ductility in the tensile experiments. The steel fibre content and steam curing significantly improved the tensile strength of the UHPC specimens. Based on the test data, the skeleton curves and hysteresis criteria of UHPC under compression and tension were proposed, and the formulae describing the process of unloading and reloading, which can be used for the basic constitutive model of UHPC, were fitted. Finally, five UHPC shear wall specimens were designed and simulated through the proposed model. The numerical results obtained using the proposed constitutive model and modelling methodology, including the skeleton curves, failure modes, ductility, and the deformation capacity of the UHPC shear walls, agreed significantly with the experimental results, confirming the reliability and high accuracy of the proposed UHPC constitutive model, thereby increasing the applicability of UHPC.

Evaluation of typical dynamic damage models used for UHPC based on SHPB technology

A novel dynamic constitutive model for UHPC under projectile impact

Novel constitutive model of UHPC under impact and blast loadings considering compaction of shear dilation

Numerical investigation of the dynamic increase factor of ultra-high performance concrete based on SHPB technology

Investigation of ultra-high performance concrete slabs under contact explosions with a calibrated K&C model

A Dynamic Constitutive Model of Ultra High Toughness Cementitious Composites

A concrete damage plasticity model for predicting the effects of compressive high-strength concrete under static and dynamic loads

Shear strength damage model and damage removal FE modeling of stud shear connectors embedded in UHPC

Constitutive modelling of UHPCC material under impact and blast loadings

Study of dynamic mechanical properties of UHPC-AAC composites based on SHPB test

An enhanced damaged plasticity model for concrete under cyclic and monotonic triaxial compression

A plasticity-based dynamic constitutive model for ultra high toughness cementitious composites

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Experimental and Numerical Research of Ultrahigh Performance Concrete Layered Shell Element Based on a Two-Dimensional Fixed Crack Model

Experimentally based parameters applied to concrete damage plasticity model for strain hardening cementitious composite in sandwich pipes

Study on the Suitability of Concrete Constitutive Models for Perforation Simulation

Lumped Plasticity Model and Hysteretic Performance of Ultra-High-Performance Concrete Rocking Pier

An improved damage-plasticity material model for concrete subjected to dynamic loading

The Mechanical Properties and Damage Evolution of UHPC Reinforced with Glass Fibers and High-Performance Polypropylene Fibers

One-dimensional Fiber Beam-Column Model and Two-Dimensional Fixed Crack Model for Numerical Simulation of UHPC Structures

Abrasion resistant characteristics of UHPC based on high-speed underwater method: Efficiency, process, evaluation, and mechanisms