Abstract:In recent years, nanoparticles (NPs) have become a popular choice for improving oil recovery through enhanced oil recovery (EOR) methods. NPs can enhance oil recovery by reducing interfacial tension (IFT), altering wettability, and decreasing the mobility ratio. In this study, magnetic NPs with acidic groups (tartaric acid and malic acid), which are natural acids found in fruits such as grapes and apples, were synthesized and functionalized to reduce the IFT between oil and water. Various characterizations tests, including zeta potential (ZP), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), dynamic light scattering (DLS), field emission scanning electron microscopy (FE-SEM), and energy dispersive X-ray analysis (EDAX), were used to determine the properties of NPs. Afterwards, the IFT behaviour of crude oil and aqueous solutions, containing surfactant sodium dodecyl sulfate (SDS), two types of salts namely sodium chloride (NaCl) and sodium sulfate (Na 2 SO 4 ), and functionalized magnetite NPs with tartaric acid and malic acid were investigated. Two crude oils were used in this study: light (A) and heavy (B). The results showed that increasing salt concentration decreases the IFT for crude oils down to an optimum point (20000 ppm for both salts), after which the IFT increases with increasing salt concentration. The presence of functionalized Fe 3 O 4 @Tartaric acid NPs (300 ppm) in the aqueous solutions containing salts at their optimum concentration (20000 ppm) and SDS (300 ppm) can decrease the IFT more significantly than that of Fe 3 O 4 and Fe 3 O 4 @Malic acid for both crude oils. This is due to higher stability and higher ZP of functionalized Fe 3 O 4 @Tartaric acid NPs compared to Fe 3 O 4 @Malic. The IFT for oil A decreases from 20.8 mN/m to 2.87 mN/m for light crude oil and from 32.96 mN/m to 1.91 mN/m for heavy crude oil. The IFT for heavy crude oil was more reduced than that of light crude oil, which was due to the presence of asphaltene, resin, and other surface-active agents in heavy crude oil, which can act as a natural surfactant in oil and help reducing the IFT.

Removal of fine solids from bitumen by hetero-aggregation and magnetic separation using surface-modified magnetite nanoparticles. Part 1: Proof of concept

Removal of fine solids from bitumen by hetero-aggregation and magnetic separation using surface-modified magnetite nanoparticles. Part 2: Role of surface modification

Efficient Oil-Water Separation with Amphipathic Magnetic Nanoparticles of Fe3O4@TiO2

Fast demulsification of oil-water emulsions at room temperature by functionalized magnetic nanoparticles

Fabrication, characterisation and magneto-responsive performance of manganese ferrite nanospheres for fast separation of oil slicks from water surfaces

Advanced magnetic nanospheres for oil pollutant management: Dual roles in emulsification and demulsification

One-step Preparation of Magnet-Responsive Amphiphilic Nanoparticles for Efficient Oil Collection

Destructing Surfactant Network in Nanoemulsions by Positively Charged Magnetic Nanorods to Enhance Oil-Water Separation

Facile fabrication of magnetite nanoparticles with new hydrophobic amides and their application in oil spill remediation

Research advancement on magnetic nanomaterial demulsifier for oil-water separation

Acceleration of Floc-Water Separation and Floc Reduction with Magnetic Nanoparticles During Demulsification of Complex Waste Cutting Emulsions

Recyclable Functional Magnetic Nanoparticles for Fast Demulsification of Waste Metalworking Emulsions Driven by Electrostatic Interactions

Magnetically recoverable poly (methyl methacrylate-acrylic acid)/iron oxide magnetic composites nanomaterials with hydrophilic wettability for efficient oil-water separation

Functional Magnetic Nanoparticles for Enhancing Ultrafiltration of Waste Cutting Emulsions by Significantly Increasing Flux and Reducing Membrane Fouling

Integrating low salinity water, surfactant solution, and functionalized magnetite nanoparticles with natural acidic groups for enhanced oil recovery: Interfacial tension study

Coupling Magnetic Particles with Flocculants to Enhance Demulsification and Separation of Waste Cutting Emulsion for Engineering Applications

Fabrication of magnetically responsive HKUST-1/Fe3O4 composites by dry gel conversion for deep desulfurization and denitrogenation

Effective Recovery of Oil Slick Using the Prepared High Hydrophobic and Oleophilic Fe3O4 Magnetorheological Fluid

Bio-inspired Durable, Superhydrophobic Magnetic Particles for Oil/water Separation

Recyclable Amphiphilic Magnetic-responsive Mixed-Shell Nanoparticles with High Interfacial Activity Comparable to Janus Particles for Oily Water Purification.

Fast and selective removal of oils from water surface via highly hydrophobic core-shell Fe2O3@C nanoparticles under magnetic field.