Abstract:A nanocomposite (TiO 2 /NiFe 2 O 4 @MWCNTs) was synthesized through hydrothermal methods, combining NiFe 2 O 4 , TiO 2 , and MWCNTs. The material underwent characterization using various analytical methods, including XRD analysis, SEM, TEM, EDS, UV-vis spectroscopy, PL analysis, FT-IR, Raman spectroscopy, and BET analysis. The average size of a nanoparticle is 36 nm, as determined by transmission electron microscopy and the Scherrer formula. UV-visible examination reveals that the TiO 2 /NiFe 2 O 4 @MWCNTs nanocomposite has an energy band gap of 1.5 eV. The resultant nanocomposite has a specific surface area of 70.5 m 2 g −1 and a pore volume of 0.29 cc g −1 . These analyses demonstrated that the inclusion of MWCNTs effectively inhibited charge carrier recombination in both NiFe 2 O 4 and TiO 2 nanoparticles. The catalyst's efficiency was evaluated in a batch reactor under diverse conditions, including different nanocomposite dosages, CIP concentrations, and pH levels. The degradation of CIP was explored through photocatalytic experiments with varying nanocomposite dosages, revealing that a dosage of 0.5 g L −1 resulted in an 83.5% degradation efficiency (CIP: 40 mg L −1 , pH = 6, 120 min, 120 W m −2 ). Different CIP concentrations were also tested, showing that a concentration of 10 mg L −1 achieved a degradation performance of 93.5% (catalyst: 0.5 g L −1 , pH = 6, 120 min, 120 W m −2 ) and an efficiency of 97.2% at a pH of 10. The optimal conditions for CIP degradation were determined as 0.5 g L −1 of nanocatalyst, a CIP concentration of 10 mg L −1 , and a pH of 10. These optimal parameters were then applied to assess CIP degradation using NiFe 2 O 4 and NiFe 2 O 4 /MWCNTs as individual materials. Trapping analyses have established that H + and OH ̇, which are reactive radicals, are the main agents responsible for the breakdown of CIP. The highest agreement with the experimental data was obtained by applying a pseudo-first-order kinetic model, which had an R 2 value of 0.97 for a range of CIP concentrations. Notably, even after four consecutive uses, the photocatalysts maintained their original efficiency, experiencing a minimal decrease of less than 3.2% in CIP degradation. Due to its straightforward synthesis, excellent stability, and potential for recycling, TiO 2 /NiFe 2 O 4 @MWCNTs demonstrated promising performance in degrading CIP antibiotics, suggesting its suitability for removing and breaking down pharmaceutical organic contaminants in water systems.

Bifunctional Purposes of Composite TiO2/CuO/Carbon Dots (CDs): Faster Photodegradation Pesticide Wastewater and High Performance Electromagnetic Wave Absorber

In-situ route for the graphitized carbon/TiO<sub>2</sub> composite photocatalysts with enhanced removal efficiency to emerging phenolic pollutants

Facile Hydrothermal Synthesis of Carbon Dots (cds) Doped ZnFe2O4/TiO2 Hybrid Materials with High Photocatalytic Activity

Composite of TiO2 Nanoparticles and Carbon Nanotubes Loaded on Poly(methyl Methacrylate) Nanofibers: Preparation and Photocatalytic Performance

Large-scale fabrication of green carbon quantum dots and its nanocomposite with TiO2 for enhanced photocatalytic oxidation of organic pollutants

Visible light-driven cubic structured NiFe 2 O 4 @MWCNTs/TiO 2 ternary nanocomposite for photocatalytic degradation of ciprofloxacin

Enhancement of carbamazepine photodegradation using hybrid of phosphorescent carbon dots coupled with highly porous TiO 2 photocatalyst

Boosting Degradation of Synthetic Dye and Pesticide Residues in Water Using NCDs/FeNH2BDC Photocatalysts

Enhanced photocatalytic degradation of Acid Blue dye using CdS/TiO2 nanocomposite

Construction of polynary systems by coupling Cd/CdS with magnetic recyclable CuO/Fe2O3/CuFe2O4 nanocomposite for enhancing photo-Fenton degradation of antibiotics

Insightful properties-performance study of Ti–Cu–O heterojunction sonochemically embedded in mesoporous silica matrix for efficient tetracycline adsorption and photodegradation: RSM and ANN-based modeling and optimization

Preparation of CDs-TiO2/SiCf Materials by Cladding Carbonization Method and the Degradation of Enrofloxacin

Fabrication of Copper-Terephthalate Frameworks and N-Doped Carbon Dots Composite for Boosting Photocatalytic Performance

Synthesis of Dual p-n Heterojunction of Ni/Mn-MOF-74/CdS@Co3O4 Photocatalyst as a Photoassisted Fenton-like Catalyst for Removal of Tetracycline Hydrochloride

Carbon quantum dots-modified tetra (4-carboxyphenyl) porphyrin/BiOBr S-scheme heterojunction for efficient photocatalytic antibiotic degradation

Visible-light-active type-II heterojunction CdS@Cu 0.5 Mg 2.5 SnS 4 composites for the efficient removal of brilliant green dye

Carbon dots as heterojunction transport mediators effectively enhance BiOI/g-C3N4 synergistic persulfate degradation of antibiotics

Synthesis of a Carbon Dots Modified G-C3n4/sno2 Z-scheme Photocatalyst with Superior Photocatalytic Activity for PPCPs Degradation under Visible Light Irradiation.

Photocatalytic Degradation Of Tetracycline Hydrochloride Via A Cds-Tio2 Heterostructure Composite Under Visible Light Irradiation

Study on Photocatalytic Degradation and Antibacterial Properties of Conjugated Microporous Polymers/tio2 Composite Membranes

Porous TiO2/Carbon Dot Nanoflowers with Enhanced Surface Areas for Improving Photocatalytic Activity