Abstract:Water contamination with hazardous dyes is a serious environmental issue that concerns humanity. A green technology to resolve this issue is the use of highly efficient photocatalysts under visible light to degrade these organic molecules. Adding composite and modifying shape and size on semiconductor materials are attempts to improve the efficacy of these compositions. The optical, microstructural and photocatalytic features of the compositions were investigated by several characterization procedures such as XRD, XPS, SEM, and TEM. Here, modifies Scherrer equation, Williamson–Hall (W–H), and Halder–Wagner method (H–W) have been used to investigate the crystal size and the micro-strain from the XRD peak broadening analysis. The average crystal size according to Modified Scherrer's formula was 6.04–10.46 nm for pristine CdS and CdS/Gd2O3@GO, respectively. While the micro-strain (ɛ) corresponds to 3.88, 4.63, 4.03, and 4.15 for CdS, Gd 2 O 3 , CdS/Gd 2 O 3 , and CdS/Gd 2 O 3 @GO. It was also shown that the modest difference in average crystal size acquired by the Modified Scherrer and Halder–Wagner (HW) forms was related to differences in average particle size classification. As a result, the Halder–Wagner method was accurate in estimating crystallite size for the compositions. The average roughness is slightly changed from 4.4 to 4.24 nm for CdS/Gd 2 O 3 and CdS/Gd 2 O 3 @GO, respectively. A kinetics investigation further revealed that the photocatalytic degradation of MB dyes was accompanied by a Langmuir isotherm and a pseudo-second-order reaction rate. The highest adsorption capacity (qe) determined for (type 1) CdS, Gd 2 O 3 , CdS/Gd 2 O 3 , and CdS/Gd 2 O 3 @GO adsorption was 5, 0.067, 0.027, and 0.012 mgg −1 , respectively. The R 2 values originated from the pseudo-second-order (type 2) for CdS, Gd 2 O 3 , CdS/Gd 2 O 3 , and CdS/ Gd 2 O 3 @GO were 0.904, 0,928, 0.825, and 0.977. As a result, the initial sorption rate (h) is altered between types 1 and 2. In type 2, the pseudo-second-order rate constant (k2) ranges from 0.005 for CdS to 0.011 for CdS/Gd 2 O 3 @GO. The Langmuir Hinshelwood and pseudo-second-order kinetic models describe the photodegradation process. The results demonstrate that the developed compositions can be used as a long-term substance for dye removal.

Visible-light-active type-II heterojunction CdS@Cu 0.5 Mg 2.5 SnS 4 composites for the efficient removal of brilliant green dye

Novel C3N4–CdS Composite Photocatalysts with Organic–inorganic Heterojunctions: in Situ Synthesis, Exceptional Activity, High Stability and Photocatalytic Mechanism

Synthesis of Mesoporous CdS/titania Composites with Visible Light Photocatalytic Activities

CQDs modified Bi2MoO6/CuS p–n heterojunction photocatalytic efficient degradation of tetracycline

Effect of CdS loading on the properties and photocatalytic activity of MoS2 nanosheets

An Efficient p-n Heterojunction Copper Tin Sulfide/g-C3N4 Nanocomposite for Methyl Orange Photodegradation

Gd2O3/CdS Nanocomposites were Synthesized for Photocatalytic Elimination of Methyl Blue (MB) Dye Under Visible Light Irradiation

In suit constructing 2D/1D MgIn2S4/CdS heterojunction system with enhanced photocatalytic activity towards treatment of wastewater and H2 production

Novel Type-II Heterojunction Binary Composite (CdS/AgI) with Outstanding Visible Light-Driven Photocatalytic Performances toward Methyl Orange and Tetracycline Hydrochloride

CdS QDs grown on ellipsoidal BiVO4 for efficient photocatalytic degradation of tetracycline

Fabrication of g-C 3 N 4 /CuS heterojunction: A potential Z scheme photocatalyst for dye degradation in aqueous media under direct sunlight illumination

In-situ constructing visible light CdS/Cd-MOF photocatalyst with enhanced photodegradation of methylene blue

Magnetic grinding synthesis of copper sulfide-based photocatalytic composites for the degradation of organic dyes under visible light

Fabrication of Ternary MoS2/CdS/Bi2S3-Based Nano Composites for Photocatalytic Dye Degradation

Novel Visible-Light Driven G-C3n4/zn0.25cd0.75s Composite Photocatalyst for Efficient Degradation of Dyes and Reduction of Cr(VI) in Water

g-C3N4/graphene oxide/SnFe2O4 ternary composite for the effective sunlight-driven photocatalytic degradation of methylene blue

Preparation Of Bi2s3/Carbon Quantum Dot Hybrid Materials With Enhanced Photocatalytic Properties Under Ultraviolet-, Visible- And Near Infrared-Irradiation

CuS/Bi2O3 composites activating PMS under visible light for efficient degradation of antibiotic tetracycline

Microwave-assisted synthesis of ZnS@CuInxSy for photocatalytic degradation of coloured and non-coloured pollutants

Preparation of Z-type Cu2SnS3/g-C3N4 heterojunction material and its synergistic photocatalytic performance with H2O2

S-scheme Heterojunction G-C3n4/ag/agnco for Efficient Tetracycline Removal in a Photo-Assisted Peroxymonosulfate System