Abstract:An improved ghost-cell immersed boundary method coupled with a high-order finite difference scheme is currently proposed to numerically simulate the reflected shock/boundary layer interaction in a wavy-wall tube. The main improvement of current algorithm involves the particular treatment of the solid boundary reconstruction procedure by using both ghost points in solid domain and forcing points in fluid domain together. Owing to this kind of improvement operation, the amount of points used to recover the solid boundary increases greatly and will inevitably promote the accuracy of solid boundary reconstruction, which will play a significant role in the current high-order accurate numerical simulation. A typical validation case of 2-dimensional shock/circular cylinder interaction is conducted and demonstrate that the current improved numerical method can be used to capture the flow details such as shock bifurcation and small vortex very well and improve the numerical precision greatly. The improved method is then applied to numerically investigate the effects of boundary layer on the propagation of the shock in a wavy-wall tube. It is observed that, at low Mach number, the existence of boundary layer has little effect on the shock propagation. As the Mach number increases to 1.9, some certain complicated flow features will occur due to the enhanced boundary layer effects. In the early stage, the flow structures are nearly the same as those without the boundary layers. In the transition stage, a high-speed shear band behind the leading shock is observed and finally evolves into a worm-like structure, whose instability is illustrated by qualitative assessment on its flow features. In the developing stage, a remarkable shock bifurcation phenomenon is present and the worm-like structures will start shedding regularly, which will induce a series of scattering-like waves and asymmetrical flow fields. These characteristics demonstrate that the bifurcated shock waves located in upper and lower walls of the wavy-wall shock tube act as a primary trigger to gradually destabilize the shocked flow.

Momentum balance based model for predicting the scale of separation bubbles induced by incident shock wave/turbulent boundary layer interactions

New two-scale hydrodynamic model based on energy balance in bubble column

Modelling of Mass Transfer for Gas-Liquid Two-Phase Flow in Bubble Column Reactor with a Bubble Breakage Model Considering Bubble-Induced Turbulence

A Modified Bubble Breakage and Coalescence Model Accounting the Effect of Bubble-Induced Turbulence for CFD-PBM Modelling of Bubble Column Bubbly Flows

A CIP-based Numerical Simulation of Freak Wave Impact on a Floating Body

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

A CIP-based Numerical Simulation of Wave Interaction with a Fluid-Filled Membrane Submerged Breakwater

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Numerical Simulations of Shock/obstacle Interactions Using an Improved Ghost-Cell Immersed Boundary Method

Spatio-temporal dynamics of turbulent separation bubbles

Assessment of the Force-Balance Model in Predicting the Bubble Departure Diameter in Inclined Channels

NUMERICAL INVESTIGATION ON TURBULENCE MODELS IN BUBBLY FLOW USING EULER-LAGRANGE APPROACH

Model for the dynamics of micro-bubbles in high-Reynolds-number flows

Theory-based prediction of separation angle and peak pressure for laminar separated hypersonic compression corner flows

A SIMPLIFIED FORCE-BALANCE MODEL TO PREDICT BUBBLE DEPARTURE DIAMETER IN HORIZONTAL FLOW BOILING

Study of the streamwise location of a micro vortex generator for a separation-control mechanism in supersonic flow

On the shock wave boundary layer interaction in slightly-rarefied gas

On the shock wave boundary layer interaction in slightly rarefied gas

A modified force balance model for predicting bubble departure diameter and lift-off diameter in subcooled flow boiling

Influences of microjet pressure and number of microjets on the control of shock wave/boundary layer interaction

Investigation on the three-dimensional shock wave/turbulence boundary layer control induced by the secondary recirculation jets