Abstract:Abstract Global warming is one of the most significant issues the world is facing. Capturing carbon dioxide from the atmosphere or industrial processes and storing it in geological formations (carbon capture and storage, CCS) can help counteract climate change. Nevertheless, the interaction between well barrier elements such as cement, casing, tubulars, packers, and valves can lead to possible leakages. To accomplish successful carbon dioxide sequestration, injecting the carbon dioxide in its supercritical state is necessary. The supercritical carbon dioxide can corrode steel and elastomers and react with the calcium compounds in the cement, dissolving them and forming calcium carbonate and bicarbonate in the process. This carbonation can lead to channels forming on the cement-to-rock interface or cracking due to the carbonate precipitation, resulting in a loss of well integrity. This study focusses on finding ways that enable the continuous monitoring of cement integrity, under in-situ conditions, in a lab setup. The construction of an autoclave, capable of withstanding supercritical conditions of carbon dioxide, facilitates the in-situ monitoring. This autoclave also makes CT-scans of the pressurized sample possible, as well as acoustic measurements, using state-of-the-art piezo elements. The first tests will establish a baseline using neat Class G Portland cement to verify the design and sensors. The set up consists of a rock core in the middle of the autoclave surrounded by a cement sheath. A prepared channel in the center of the core expedites the distribution of the carbon dioxide. Once the ability of the sensors to monitor the integrity is verified, different cement compositions and their interaction with supercritical carbon dioxide can be studied. The experimental setup and the procedure discussed here closely simulate the downhole condition. Hence, the results obtained using this setup and procedure is representative of what could be observed downhole. The direction is not to remove the sample from the autoclave for analysis, as is the current industry practice, but to measure cement integrity under in-situ conditions over an extended period of time. Digitalization is powering the in-situ analysis in these tests. The first two tests of this study, using the afore mentioned autoclave, investigated the carbonation behaviour of two Class G Portland cement slurrys, one with a low and one with a high slurry-density. The low-density slurry showed extensive degradation and even the high-density slurry showed carbonation, but only close to the sandstone core. The results from this study can lead to the prevention of leakage of carbon dioxide to the environment and other formations, which defeats the purpose of carbon dioxide sequestration. These results should improve the economics of these wells as well as the health, safety, and environmental aspects.

In-situ ATR-IR monitoring of hydrothermal carbonation of wollastonite

In Situ Time-Resolved Attenuated Total Reflectance Infrared Spectroscopy for Probing Metal-Organic Framework Thin Film Growth.

Particle Carbonation Kinetics Models and Activation Methods under Mild Environment: the Case of Calcium Silicate

Coprecipitation of Crystalline Calcium Silicates and Carbonates from the Hydrothermal Reaction of Pseudowollastonite

Reaction Mechanism of Wollastonite In Situ Mineral Carbonation for CO2 Sequestration: Effects of Saline Conditions, Temperature, and Pressure

Reaction Rates in Chemically Heterogeneous Rock: Coupled Impact of Structure and Flow Properties Studied by X-ray Microtomography.

Nanoscale Control Over Water-Film Thickness Using Temperature Modulation: Tuning Mineral Carbonation Reactivity

Real-Time Monitoring of the Effect of CO2 on the Cement Sheath

Reservoir-condition pore-scale imaging of dolomite reaction with supercritical CO 2 acidified brine: Effect of pore-structure on reaction rate using velocity distribution analysis

An Ultrasound Tomography Method for Monitoring CO2 Capture Process Involving Stirring and CaCO3 Precipitation

Effect of surface water on wollastonite carbonation: Activated dissolution and mass transfer

A Flexible Method of Carbonate Determination Using an Automatic Gas Analyzer Equipped with an Ftir Photoacoustic Measurement Chamber

The Carbonation of Wollastonite: A Model Reaction to Test Natural and Biomimetic Catalysts for Enhanced CO2 Sequestration

Accelerated Carbonation of High-Calcite Wollastonite Tailings

In-situ XRD Studies of dolomite based CO2 sorbents

In Situ Quantification of Carbonate Species Concentrations, pH, and pCO_2 in Calcite Fluid Inclusions Using Confocal Raman Spectroscopy

The Conversion of Wollastonite to CaCO3 Considering Its Use for CCS Application as Cementitious Material

Raman and Infrared Spectroscopic Quantification of the Carbonate Concentration in K2CO3 Aqueous Solutions with Water As an Internal Standard

Utilizing Limestone Alone for Integrated CO2 Capture and Reverse Water-Gas Reaction in a Fixed Bed Reactor: Employing Mass and Gas Signal Analysis

In Situ Time-Dependent Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectroscopy of a Powdered Specimen in a Controlled Atmosphere: Monitoring Sorption and Desorption of Water Vapor

Alkali Activation of Metakaolin and Wollastonite: Reducing Sodium Hydroxide Use and Enhancing Gel Formation through Carbonation