Abstract:Silicon has emerged as a highly promising anode material for lithium-ion batteries (LIBs) owing to its high specific capacity and low voltage. However, previous research on silicon-based anodes has not adequately addressed inherent issues, leading to limited commercial applications on a large scale. Therefore, further scientific investigation is necessary to uncover the lithiation/delithiation process in silicon materials and understand the influence of electrode potential and charge state on the kinetic process during charge and discharge. This understanding will be instrumental in gradually enhancing the performance of silicon materials. Herein, amorphous silicon films were prepared for LIB anodes using the magnetron sputtering method. Molecular dynamics simulations were conducted to investigate the microstructure and volumetric changes of the sputtered amorphous silicon anode during the lithiation and delithiation processes. Additionally, electrochemical characterization techniques such as a galvanostatic intermittent titration technique, electrochemical impedance spectroscopy, and galvanostatic charge–discharge test were employed to explore the electrochemical properties of silicon electrodes. Electrochemical analysis techniques, such as the differential capacity method and distribution of relaxation times, were also used to investigate the deterioration mechanisms of the electrochemical and conversion properties of amorphous silicon anodes. Results revealed that the lithium-ion content in Li x Si, determined through the set cutoff voltage during charge/discharge cycling, considerably affected the volume change of the silicon anode and the composition and integrity of the solid electrolyte interface after cycling. The optimum discharge cutoff voltage was found to be 0.08 V for the amorphous silicon electrode, leading to an optimum cycle life with a capacity retention of 87.17% after 100 cycles.

A stress-based charging protocol for silicon anode in lithium-ion battery: Theoretical and experimental studies

Tailoring Stress and Ion-Transport Kinetics Via a Molecular Layer Deposition-Induced Artificial Solid Electrolyte Interphase for Durable Silicon Composite Anodes

Molecular dynamic investigation of the structure and stress in crystalline and amorphous silicon during lithiation

Compressively Stressed Silicon Nanoclusters as an Antifracture Mechanism for High-Performance Lithium-Ion Battery Anodes

Deformation and failure of lithiated Si electrodes of Li-ion batteries

Structural control and optimization schemes of silicon‐based anode materials

Investigation into the impact of charging rates on the stress development within silicon composite electrodes

Silicon Anode Design for Lithium-Ion Batteries: Progress and Perspectives

Stress-Dependent Chemo-Mechanical Performance of Amorphous Si Anodes for Li-Ion Batteries upon Lithiation

Experimental measurement of electro-chemo-mechanical properties of a composite silicon electrode in lithium ion batteries

Modeling of contact stress among compound particles in high energy lithium-ion battery

Mitigation of Volumetric Expansion in Silicon Anodes Via Engineered Porosity: Electrochemical Performances and Stress Distribution Implication

Lifetime Optimization of Amorphous Silicon Thin-Film Anodes for Lithium-Ion Batteries

A simple and effective approach to relieve stress and enhance cyclability of Si-based materials toward high-energy lithium-ion batteries

Nanostructure designing and hybridizing of high-capacity silicon-based anode for lithium-ion batteries

Waterbeds Inspired Stress Relaxation Strategies of Patterned Silicon Anode for Fast-Charging and Longevity of Lithium Microbattery

Graphene mitigated fracture and interfacial delamination of silicon film anodes through modulating the stress generation and development

Strategies for Controlling or Releasing the Influence Due to the Volume Expansion of Silicon inside Si-C Composite Anode for High-Performance Lithium-Ion Batteries

A Chemo-Mechanical Model for Fully-Coupled Lithiation Reaction and Stress Generation in Viscoplastic Lithiated Silicon

High voltage electrolytes for lithium-ion batteries with micro-sized silicon anodes

The Solid Electrolyte Interphase on Silicon Electrodes Boosts the Stability of Lithium-Ion Batteries