A highly sensitive polydopamine@hybrid carbon nanofillers based nanocomposite sensor for acquiring high-frequency ultrasonic waves

Zengsheng Weng,Ruiqi Guan,Fangxin Zou,Pengyu Zhou,Yaozhong Liao,Zhongqing Su,Lin Huang,Faqian Liu

DOI: https://doi.org/10.1016/j.carbon.2020.08.030

IF: 10.9

2020-12-01

Carbon

Abstract:<p>Nanocomposite strain sensors have shown application prospect in a wide range of applications. However, the sensitivities of the existing nanocomposite strain sensors to high-frequency dynamic strains are rather unsatisfactory. Herein, we fabricate a highly sensitive nanocomposite sensor for acquiring microscopic vibrations generated by ultrasonic waves, from polydopamine(PDA)-coated hybrid carbon nanofillers. First, multi-walled carbon nanotubes (MWCNTs) are coated by 10s nm thick viscous PDA to improve their compatibility with polyvinylidene fluoride substrates. Compared to uncoated MWCNTs, the use of 15 wt.% PDA-coated MWCNTs leads to a 40% increase in sensitivity. Then, one-dimensional are mixed with two-dimensional single-layer graphene to enhance the geometric contact between nanofillers. The sensitivity of sensors with hybrid nanofillers far exceeds that of sensors. Also, as the mass fraction of graphene within hybrid nanofillers expands from 33% to 66%, the sensitivity of the proposed sensor improves by approximately 120%, surpassing that of pure graphene sensors. The high sensitivity of the proposed sensor, which actually utilizes a lower graphene content, was shown to be derived from the synergy between the two types of nanofillers which are of different dimensionalities. This study presents a novel approach for optimizing the sensitivity of nanocomposite strain sensors to high-frequency micro-vibrations.</p>

materials science, multidisciplinary,chemistry, physical

What problem does this paper attempt to address?

The paper attempts to address the issue of fire safety for exterior wall cladding of high-rise buildings in China. In recent years, there have been several fire incidents in China where fires rapidly spread across the exterior walls of high-rise buildings, resulting in significant property damage and casualties. These incidents are often related to the use of combustible insulation materials on the exterior walls, which, without proper fire protection, can easily lead to uncontrollable fire spread. Therefore, the paper reviews the current regulations and standards environment in China regarding the fire safety of exterior wall cladding, analyzes the causes, spread mechanisms, and issues of three high-rise building fire cases involving rapid fire spread on exterior walls, and introduces recent research progress and regulatory developments in improving the fire performance of exterior wall cladding. The paper suggests that by limiting the combustibility of insulation materials used for exterior wall cladding (especially in relation to building height) and adopting appropriate fire protection measures, an acceptable level of fire safety performance for exterior wall cladding of high-rise buildings can be achieved.