Abstract:The Cavia porcellus skin (Cuy), after receiving a tanning process, using synthetic tannins, becomes a high quality leather, very suitable in the articles manufacture of high quality. Its main objective was the evaluation of different levels of synthetic tannin (6, 7, 8%) during the tanning process of guinea pig skins with hair; using 48 skins, with an average mass of 200 g each. The experimental units modeled with a Completely Random Design (DCA. Once the experimental phase was completed, it observed that the most skin tanning suitable level the guinea pig (retaining hair) is 6 % of synthetic tanning agent; it ́s supported by the excellent results the tests performed. The physical resistance evaluation determined that the best tensile strength (1945.75 N/cm2) it ́s reached whit 6 % of synthetic tannin and the best percentage of elongation (89.69 %) achieved with the use of 7 % of tannin (which fully meet the requirements quality the Spanish Leather Association). The most efficient sensorial characteristics obtained with 6 % of tannin: fullness 4.88; softness 4.63 and roundness 4.75 points, respectively; producing a very soft, flexible skin and above all with the fullness suitable for the fine articles manufacture. Keywords: tanning, skins, guinea pig, synthetic tannins. Resumen La piel del Cavia porcellus (Cuy), después de curtida, empleando taninos sintéticos, se convierte en un cuero de alta calidad, muy adecuado en la peletería fina. Esta investigación tuvo por objetivo fundamental la evaluación de diferentes niveles de tanino sintético (6, 7, 8 %) durante el proceso de curtición de pieles de cuyes con pelo; utilizando para ello un total de 48 pieles, con una masa promedio de 200 g cada una. Las unidades experimentales fueron modeladas con un Diseño Completamente al Azar (DCA). Una vez culminada la fase experimental, se pudo constatar que el nivel más adecuado para la curtición de la piel de cuy (conservando el pelo) es del 6 % de curtiente sintético; lo cual quedó avalado por los excelentes resultados de las pruebas practicadas. La evaluación de las resistencias físicas determinó que la mejor resistencia a la tensión (1945,75 N/cm2) se alcanzó al curtir con 6 % de tanino sintético, y el mejor porcentaje de elongación (89,69 %), se logró con la utilización de 7 % de tanino (que satisfacen completamente con las exigencias de calidad de la Asociación Española del Cuero). Las características sensoriales más eficientes fueron logradas al curtir las pieles con 6 % de tanino: llenura 4,88; blandura 4,63 y redondez 4,75 puntos, respectivamente; produciéndose una piel muy suave, flexible y sobre todo con la llenura adecuada para la confección de artículos de peletería fina. Palabras Clave: Clave: curtición, pieles, cuy, taninos sintéticos.

A study on dehairing of vicuña fiber: evaluation of yields and quality characteristics that impact on its transformation and textile added value

FASCICLE OF TEXTILES , LEATHERWORK 13 FE-SEM COMPARATIVE STUDY ON SURFACE MODIFICATION OF WOOL FIBER AFTER DIFFERENT CHEMICAL TREATMENTS

USE OF SYNTHETIC TANINES DURING THE SKIN CURTITION PROCESS OF Cavia porcellus (CUY) IN FINE PELETERY

Body Region Sampling Areas- and Phaneroptics-Associated Hair Fiber Phenotypes in Canarian Camel Versus Merino Sheep

A Comparison of the Physical Properties Between Merino Wool and Camel Hair Through Discriminant Analysis

Variability of Fibre Quality on Chinese Alashan Left Banner White Cashmere Goat

Deciphering the fiber quality of Gossypium barbadense L. var. brasiliensis in La Convención, Cusco, Perú

Valorization of treated wastewater from the soaking of baby alpaca skin fur

Effect of the Chemical Unhairing Process on Pulled Wool Characteristics

Towards Sustainable Viscose-to-Viscose Production: Strategies for Recycling of Viscose Fibres

Using an eco-friendly cold pad-batch reduction pretreatment to improve the whiteness, hydrophilicity, and anti-shrinkage of wool fabric

Bio-Antifelting Treatment of Wool-Fiber Based on Ficin: Improvement and Effect on Dyeing with the Reseda luteola Plant

An efficient ultrasonic-assisted bleaching strategy customized for yak hair triggered by melanin-targeted Fenton reaction

Upcycling Wool Waste into Keratin Gel-Based Nanofibers Using Deep Eutectic Solvents

Operation Parameters Of Alpaca Fiber Dyeing With Supercritical Fluid

Valorization of Waste Wool to Keratin with a Green Solvent Based on a Deep Eutectic Mixture of Choline Chloride and Lactic Acid

The dark side of the wool? From wool wastes to keratin microfilaments through the solution blow spinning process

Silk wastes and autoclaved degumming as an alternative for a sustainable silk process

Effect of Surface Modification of Himalayan Nettle Fiber and Characterization of the Morphology, Physical and Mechanical Properties

Towards zero-waste processes: Waste wool derivatives as phosphate adsorbents and auxiliaries for textiles' natural dyeing

STUDY ON MORPHOLOGICAL AND STRUCTURAL CHANGES INDUCED BY ULTRASONIC DEGREASING OF WOOL AND HUMAN HAIR WASTES