Abstract:The number of microspacecraft launched has significantly increased since 2013, and more than 300 nano/microsatellites ( 1 km/s) thrusters are required for more advanced missions. One of the candidates for such thrusters is ion thrusters, which were already mounted on two 50 kg-class microsatellites and successfully operated in space. However, it is not easy to miniaturize ion thrusters so that they can be mounted on even 10 kg-class nanosatellites unless high-pressure gas-feeding systems are removed. Moreover, ion thrusters require electron sources to neutralize ion beams, which consume additional propellants and power. Since most recently launched microspacecraft are less than 10 kg, more compact thrusters are required. Ionic liquid electrospray ion sources are attractive devices for such electric propulsion, especially for microspacecraft. Electrospray thrusters typically consist of many emitters, an extractor electrode, and an accelerator electrode optionally. When a high voltage between the emitter and the extractor is applied, the ionic liquid is transported to the emitter tips, and a strong electric field deforms the ionic liquid into a conical shape known as a Taylor cone. When the force of the electric field is stronger than the surface tension pressure of the ionic liquid, ions evaporate directly from the liquid surface. The extracted ions are then accelerated by the potential difference between the emitter and extractor to produce the thrust. Since the ionic liquid is composed of only cations and anions without solvent, its vapor pressure is negligible; therefore, it can exist in the liquid phase in vacuum, simplifying the propellant feed system and reducing the size of the entire propulsion system. Moreover, the direct acceleration of ions without discharges can be possible, and no neutralizers are required, which also contributes to the power and size reduction together with high efficiency. The key component of electrospray thrusters is the emitter, where there are typically three types of structures: externally-wetted (or needle-shaped), internally-wetted (or capillary), and porous ones. Each has ion emission characteristics depending on the structure. Here, we have fabricated these three types of emitter structures with a wide range of scale: 1 to 100 micrometers. Using these emitters, we have conducted ion emission experiments and beam diagnostics. We obtained a high current density over a few 10 mA/cm 2 with 1-micrometer scale emitters, a high current of approximately 1 mA with porous emitters, and a high efficiency with externally-wetted emitters. The emitter structures as mentioned earlier and experimental results will be presented at the conference site.

High-Throughput Ionic Liquid Ion Sources Using Arrays of Microfabricated Electrospray Emitters With Integrated Extractor Grid and Carbon Nanotube Flow Control Structures

A Microfabricated Planar Electrospray Array Ionic Liquid Ion Source With Integrated Extractor

Fabrication of nano-capillary emitter arrays for ionic liquid electrospray thrusters

Fabrication of a high-density emitter array for electrospray thrusters using field emitter array process

Microfabricated emitter array for an ionic liquid electrospray thruster

A Planar Array of Micro-Fabricated Electrospray Emitters for Thruster Applications

Characterization of Conical Ionic Liquid Ion Sources for 2-D Electrospray Thruster Arrays on Porous Substrates

Integrated out-of-plane nanoelectrospray thruster arrays for spacecraft propulsion

Scalable Microfabrication of Multi-Emitter Arrays in Silicon for a Compact Microfluidic Electrospray Propulsion System

Uniform needle-emitter arrays for ionic liquid electrospray thrusters with precise thrust control

Multiscale modeling of electrospray ion emission

Fabrication of externally wetted emitter for ionic liquid electrospray thruster by low-speed wire cutting combined with electrochemical etching

(Invited) Ionic Liquid Electrospray Ion Sources for Space Propulsion

Microfabricated electrospray emitter arrays with integrated extractor and accelerator electrodes for the propulsion of small spacecraft

Emission measurements and in-situ observation of ionic liquid electrospray thrusters with longitudinally grooved emitters

Additively manufactured electrohydrodynamic ionic liquid pure-ion sources for nanosatellite propulsion

The Current Analysis of Electrospray Process on a Single Emitter with Ionic Liquid for Micro Propulsion

Stable electrospray signal on a microfabricated glass chip with three-dimensional open edge and tiered depth geometries

Multinozzle emitter arrays for nanoelectrospray mass spectrometry.

Ionic Liquid Electrospray Thruster with Two-Stage Electrodes On Glass Substrate