Abstract:In recent years, the rotating electromagnetic field eddy current (RoFEC) testing technique has attracted widespread attention due to its various advantages for inspecting tubular structures. However, most of the related work was focused on detecting inner wall defects on metal pipes using feed-through probes, which are often not applicable for outer wall defect detection. This work pushes forward the encircling RoFEC technique and demonstrates its feasibility for detecting outer wall defects. First, the basic principle of the encircling RoFEC technique is introduced. A three-dimensional finite element (FE) model was built in COMSOL to analyse the distribution of the rotating electromagnetic field and study the interaction between the defects and eddy currents. The axial component of the resultant magnetic field due to defects was selected as a characteristic signal and obtained from the FE models to study the factors, including pipe tilt, defect circumferential location, defect orientation and defect size, that influence the detection performance. An encircling RoFEC system using a probe with six excitation windings and a single bobbin pickup coil was constructed and used to inspect a steel pipe with one axial and one circumferential defect. The obtained voltage signal due to defects can form a Lissajous pattern in the impedance plane and be used for defect evaluation. The results showed that the encircling RoFEC technique can detect outer wall defects of both orientations and determine the circumferential location of the defect.

Defect type identification of thin-walled stainless steel seamless pipe based on eddy current testing

Automatic Recognition and Classification of Eddy Current Testing Signals for Scanning Inspection of Defect in Multi-Layered Structures

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

Application of Hilbert–Huang transform for defect recognition in pulsed eddy current testing

A Method for Characterizing Defects in Multi-Layer Conductive Structures by Combining Pulsed Eddy Current Signals with PCA Components

Deep Defects Evaluation of Conductive Materials Based on Eddy Current Nondestructive Testing with GMR sensor

Local Defect Detection of Ferromagnetic Metal Casing Based on Pulsed Eddy Current Testing

Study on Defect Classification in Multi-Layer Structures Based on Fisher Linear Discriminate Analysis by Using Pulsed Eddy Current Technique

Differential eddy current method for full circumferential defect detection of small diameter steel pipe: numerical analysis and experimental study

A Composite Approach of Electromagnetic Acoustic Transducer and Eddy Current for Inner and Outer Corrosion Defects Detection

Quantitative Nondestructive Estimation of Deep Defects in Conductive Structures

Investigating a defect width identification based on half-peak width for LDC-based eddy current testing

Hidden defect recognition based on the improved ensemble empirical decomposition method and pulsed eddy current testing

Study on the Relationship Between Thickness Measurement and Strength Defect of Buried Pipeline

Eddy Current Test/ultrasonic Testing Integrative Method for Detecting Sub-Surface Defects in Conductive Structures

Deconvolution Imaging of Weak Reflective Pipe Defects Using Guided-Wave Signals Captured by a Scanning Receiver

Method of Imaging and Evaluation for Defect Based on Pulsed Eddy Current

Detection of Outer Wall Defects on Steel Pipe Using an Encircling Rotating Electromagnetic Field Eddy Current (RoFEC) Technique

Inspection of defects in conductive multi-layered structures by an eddy current scanning technique: Simulation and experiments

Electromagnetic Acoustic Detection of Pipe Defects Hidden above T-Type Support Structures with Circumferential Shear Horizontal Guided Wave

Defect Detection and Identification of Point-Focusing Shear-Horizontal EMAT for Plate Inspection