Abstract:Bacterial community dynamics of the ANAMMOX reactor of an integrated “UASB + SHARON + ANAMMOX” system for treating piggery wastewater were investigated using the Illumina MiSeq method with samples obtained at ~ 2-week intervals during a 314-day period. With aerobic activated sludge as seeds and low content artificial wastewater (NH4+–N 50 mg/L; NO2−–N 55 mg/L) as influent for the ANAMMOX reactor, nitrogen removal was initially observed on day 38 with a removal rate 1.3 mg N L−1 day−1, and increased to 90.4 mg N L−1 day−1 on day 55 with almost complete removal of ammonia and nitrite, indicating a successful startup of the reactor. Increasing influent load stepwise to NH4+–N 272.7 mg/L/NO2−–N 300 mg/L, nitrogen removal rate increased gradually to 470 mg N L−1 day−1 on day 228, and maintained a stable level (~ 420 mg N L−1 day−1) following introduction of SHARON effluent since day 229. Correlation between microbial community dynamics and nitrogen removal capability was significant (r = 0.489, p < 0.001). Microbial community composition was determined by influent ammonia, influent nitrite, effluent nitrate and some undefined factors. Anammox bacteria, accounting for ~ 98.7% of Planctomycetes, became detectable (0.03% relative abundance) since day 38 and increased to 0.9% on day 58, well consistent with nitrogen removal performance of the reactor. Relative abundance of anammox bacteria gradually increased to 38.4% on day 140 with stepwise increased influent load; decreased to 0.4% on day 169 because of nitrite inhibition; increased to 19.24% on day 233 when the influent load was dropped; kept at ~ 9.0% with SHARON effluent used as influent and dropped to 3.3% finally. Anammox bacteria, only Candidatus Brocadia and Ca. Kuenenia detected, were the most abundant at genus level. Ca. Brocadia related taxa were enriched firstly under low load and detectable during the entire experimental period. Three main groups represented by Ca. Brocadia related OTUs were enriched or eliminated at different loads, but Ca. Kuenenia related taxa were enriched only under high load (NO2−–N > 300 mg/L), suggesting their different niches and application for different loads. These findings improve the understanding of relationships among microbial community/functional taxa, running parameters and reactor performance, and will be useful in optimizing running parameters for rapid startup and high, stable efficiency.

Start-up of low-temperature anammox in UASB from mesophilic yeast factory anaerobic tank inoculum

Performance of anammox UASB reactor treating low strength wastewater under moderate and low temperatures

Characterization and Quantification of Anammox Start-Up in UASB Reactors Seeded with Conventional Activated Sludge

[Start-Up and Process Control of a Pilot-Scale Anammox Bioreactor at Ambient Temperature].

Promoting Sludge Quantity and Activity Results in High Loading Rates in Anammox UBF.

Synergistic Microbial Communities and Eps Analysis with High Efficiency Nitrogen Removal at Low Temperatures During Start-Up and Operation of Anammox Process

Low strength wastewater anammox start-up by stepwise decrement in influent nitrogen: Biofilm formation mechanism and mathematical modelling.

Quick start-up and stable operation of a one-stage deammonification reactor with a low quantity of AOB and ANAMMOX biomass

Anammox Granule As New Inoculum for Start-Up of Anaerobic Sulfide Oxidation (ASO) Process and Its Reverse Start-Up.

Rapid Start-Up Characteristics of Anammox under Different Inoculation Conditions

Hydrolysis and Methanogenesis in UASB-AnMBR Treating Municipal Wastewater Under Psychrophilic Conditions: Importance of Reactor Configuration and Inoculum

[Effect of Sequential Biocatalyst Addition on Anammox Process].

Start-up of the Anammox process from the conventional activated sludge in a membrane bioreactor.

Microbial community dynamics in an ANAMMOX reactor for piggery wastewater treatment with startup, raising nitrogen load, and stable performance

Nitritating-anammox biomass tolerant to high dissolved oxygen concentration and C/N ratio in treatment of yeast factory wastewater

Anammox in a UASB Reactor Treating Saline Wastewater

The start-up of anammox system inoculated with sludge overwhelmingly dominated by Candidatus Competibacter: System performance and microbial community succession

Rapid start up anammox process through a new strategy with inoculating perchlorate reduction sludge and a small amount of anammox sludge

Fast start-up of ANAMMOX biofilm processes at low temperatures by economical quorum sensing regulation: The importance of endogenous N-acyl-homoserine lactones from enhanced inoculated sludge.

Realizing stable operation of anaerobic ammonia oxidation at low temperatures treating low strength synthetic wastewater

Anammox start-up in sequencing batch biofilm reactors using different inoculating sludge