Abstract:Anaerobic ammonia oxidation (anammox) is an environmental-friendly biological nitrogen removal process, which has been developed as a promising technology in industrial wastewater treatment. However, anammox nitrogen removal under high saline conditions still faces many challenges. This study investigated the performance of anammox sludge under saline short-term shock and the strategy of rapid recovery. Salinity concentration, saline exposure time, and NaCl/Na2SO4 ratio were selected as three critical factors for short-term shock. The activity inhibition of anammox sludge were tested by using response surface methodology (RSM). Our results showed that, compared with the NaCl/Na2SO4 ratio, the salinity concentration and saline exposure time were the significant factor causing the anammox inhibition. The addition of glycine betaine (GB) in moderate amounts (0.1–5 mM) was found to help anammox to resist in relative low saline shock intensities (e.g., IC25 and IC50), with the activity retention rate of 94.7%. However, glycine betaine was not worked effectively under relatively high saline shock intensities (e.g., complete inhibition condition). Microbial community analysis revealed that Brocadiaceae accounted for only about 7.6%–13.2% at inhibited conditions. Interestingly, 16S rRNA analysis showed that the abundance of activated Brocadiaceae remarkably decreased with time after high-level saline shock. This tendency was consistent with the results of qPCR targeted hzsA gene. Finally, based on quorum sensing, the anammox activity was recovered to 93.5% of original sludge by adding 30% original sludge. The study realized the rapid recovery of anammox activity under complete inhibition, promoting the development and operation of salt-tolerant anammox process.

Anammox in a UASB Reactor Treating Saline Wastewater

Effect of Salinity on the Performance of an Anammox Reactor

Effect of the Rapid Increase of Salinity on Anoxic-Oxic Biofilm Reactor for Treatment of High-Salt and High-Ammonia-nitrogen Wastewater.

Performance of anammox UASB reactor treating low strength wastewater under moderate and low temperatures

A Holistic Analysis of ANAMMOX Process in Response to Salinity: from Adaptation to Collapse

Saline short-term shock and rapid recovery on anammox performance

Effect of Increase in Salinity on ANAMMOX–UASB Reactor Stability

Can anammox process be adopted for treating wastewater with high salinity exposure risk?

Co-inhibition of salinity and Ni(II) in the anammox-UASB reactor.

Startup, performance, and microbial communities of an anammox reactor inoculated with indigenous sludge for the treatment of high-salinity and mesophilic underground brine

High-rate nitrogen removal from waste brine by marine anammox bacteria in a pilot-scale UASB reactor

The effects of salinity changes on anammox performance: The response rule and tolerance mechanism

Suppression of Anaerobic Ammonium Oxidizers under High Organic Content in High-Rate Anammox UASB Reactor

Nitrogen removal from high-saline municipal wastewater via anammox-based process driven by both nitritation and denitratation

Performance of High-Loaded Anammox Uasb Reactors Containing Granular Sludge

Deciphering performance and microbial characterization of marine anammox bacteria-based consortia treating nitrogen-laden hypersaline wastewater: Inhibiting threshold of salinity

Enhanced Nitrogen Removal from Ammonium-Rich Wastewater Containing High Organic Contents by Coupling with Novel High-Rate ANAMMOX Granules Addition

Characterization and Quantification of Anammox Start-Up in UASB Reactors Seeded with Conventional Activated Sludge

The selective salinity and hydrazine parameters for the start-up of non-anammox-specific biomass SBR

[Effect of Sequential Biocatalyst Addition on Anammox Process].

Meta-Omics reveal the metabolic acclimation of freshwater anammox bacteria for saline wastewater treatment