Abstract:Purpose The purpose of this paper is to study the heat transfer effect of copper sensor and skin simulant on skin. Design/methodology/approach For the sensor, the physical and mathematical models of the thermal sensors were used to obtain the definite conditions in the heat transfer process of the sensor, and the heat transfer models of the two sensors were developed and solved respectively by using ANSYS WORKBENCH 19.0 software. The simulation results were compared with the experimental test results. For the skin, the numerical model of the skin model was developed and calculated. Finally, the heat transfer simulation performance of the two sensors was analyzed. Findings It is concluded that the copper sensor is more stable than the skin simulant, but the material and structure of the skin simulant is more suitable for skin simulation. The skin simulant better simulates the skin heat transfer. For all the factors in the model, the thermal properties of the material and the heat flux level are the key factors. The convective heat transfer coefficient, radiation heat transfer rate and the initial temperature have little influence on the results, which can be ignored. Research limitations/implications The results show that there are still some differences between the experimental and numerical simulation values of the skin simulant. In the future, the thermal parameters of skin simulant and the influence of the thermocouple adhesion should be further examined during the calibration process. Practical implications The results suggest that the skin simulant needs to be further calibrated, especially for the thermal properties. The copper sensor on the flame manikin can be replaced by the skin simulant with higher accuracy, which will be helpful to improve the accuracy of performance evaluation of thermal protective clothing. Social implications The application of computational fluid dynamics (CFD) technology can help to analyze the heat transfer simulation mechanism of thermal sensor, explore the influence of thermal performance of thermal sensor on skin simulation, provide basis for the development of thermal sensor and improve the application system of thermal sensor. Based on the current research status, this paper studies the internal heat transfer of the sensor through the numerical modeling of the copper sensor and skin simulant, so as to analyze the effect of the sensor simulating skin and the reasons for the difference. Originality/value In this paper, the sensor itself is numerically modeled and the heat transfer inside the sensor is studied.

Thermal sensors for performance evaluation of protective clothing against heat and fire: a review

Characterization and Modeling of Thermal Protective and Thermo-Physiological Comfort Performance of Polymeric Textile Materials—A Review

Human Thermoregulation and Injury Evaluation in Fire Environments: A Review

Thermal analysis of ultrathin, compliant sensors for characterization of the human skin

Review of the study of relation between the thermal protection performance and the thermal comfort performance of firefighters’ clothing

Development and application of numerical model of thermal sensors for thermal protective clothing evaluation based on CFD simulation

Human thermal models and their application in fire safety research

Numerical study of heat and moisture transfer in thermal protective clothing against a coupled thermal hazardous environment

Experimental and numerical studies on efficiency characterization of firefighters' protective clothing: a review

Development of a full-scale apparatus to assess thermal protective performance of garments under highly intensive heat flux exposures

Evaluation of Thermal Safety in Fire Using Human Thermal Model and CFD Simulation

Quantitative Assessment of the Relationship Between Radiant Heat Exposure and Protective Performance of Multilayer Thermal Protective Clothing During Dry and Wet Conditions

Assessment of Human Safety and Thermal Comfort in High-Temperature Environment: Cfd and Human Thermoregulation Model

Personal thermal management by thermally conductive composites: A review

Wearable Flexible Temperature Sensors and Their Applications

Measuring convection heat transfer coefficients and thermal resistance for protective fabrics using a heated cylinder in a wind tunnel

Integrated Firefighting Textile with Temperature and Pressure Monitoring for Personal Defense

Modeling of Heat Transfer through Firefighters Multilayer Protective Clothing Using the Computational Fluid Dynamics Assisted by X-ray Microtomography and Thermography

Non-invasive (non-contact) measurements of human thermal physiology signals and thermal comfort/discomfort poses -A review

Theoretical and Experimental Studies of Epidermal Heat Flux Sensors for Measurements of Core Body Temperature.

ANALYSIS OF THE THERMAL REGULATING PROPERTIES OF FIRE-FIGHTING PROTECTIVE CLOTHING WITH AN INCORPORATED PHASE-CHANGE MATERIAL