Abstract:It is essential to understand the in-situ geomechanical properties of natural gas hydrate-bearing reservoirs for hydrate drilling, the design of reservoir stimulation and production schemes, geologic disaster prevention, and environmental impact assessment. In this way, it serves as the basis for the development and utilization of gas hydrate resources. In 2016, the Guangzhou Marine Geological Survey conducted the fourth natural gas hydrate drilling (Expedition GMGS4) in the north of the South China Sea, during which the effective stress of gas hydrate-bearing reservoirs in the study area was ascertained and gas hydrate-bearing pressure cores were collected. The effective stress was determined to be 700–800 kPa by in-situ piezocone penetration tests. The saturation, permeability, and shear strength of gas hydrates in the pressure core samples were measured under the in-situ stress state using the shipboard multi-sensor core logger (MSCL), pressure core analysis and transfer system (PCATS), and PCATS Triaxial system. Based on this, the distribution characteristics and the relationship of the permeability and gas hydrate saturation of the gas hydrate-bearing reservoirs were explored. Furthermore, the effects of effective stress and gas hydrate saturation on shear strength of gas hydrate-bearing clayey-silt sediments were mainly analyzed, as well as the stress–strain characteristics of gas hydrate-bearing sediments. The results are as follows: (i) the gas hydrate saturation and reservoir permeability in the study area are 0.7%–55% and 10−3–10−1mD, respectively, indicating low-permeability reservoirs; (ii) the gas hydrate saturation and reservoir permeability have obvious anisotropy in horizontal and vertical directions; (iii) the undrained shear strength of gas hydrate-bearing sediments is 0.24–0.52 MPa, and the shear strength of fine-grained sediments is more sensitive to the changes of in-situ stress. In the case that deviatoric stress continues increasing, micro-fractures may occur inside gas hydrate-bearing sediments, and this can lead to drastic changes in the strength of gas hydrate-bearing reservoirs. Therefore, it is necessary to take into account the effects of micro-fractures in gas hydrate-bearing reservoirs on engineering safety during long-term hydrate production.

Permeability analysis of gas hydrate-bearing sand/clay mixed sediments using effective stress laws

Experimental Study on Permeability and Gas Production Characteristics of Montmorillonite Hydrate Sediments Considering the Effective Stress and Gas Slippage Effect

Formation Kinetics and Morphology Characteristics of Fracture-Filling Natural Gas Hydrate under the Influence of Multiple Parameters

Pore‐Scale Controls on the Gas and Water Transport in Hydrate‐Bearing Sediments

Experimental Study on the Evolution of Compressibility and Gas Permeability of Sediments after Hydrate Decomposition under Effective Stress

Impact of hydrate spatial heterogeneity on gas permeability in hydrate-bearing sediments

Permeability properties of natural gas hydrate-bearing sediments considering dynamic stress coupling: A comprehensive experimental investigation

Geomechanical properties of gas hydrate-bearing sediments in Shenhu Area of the South China Sea

Experimental Study on the Gas Phase Permeability of Methane Hydrate-Bearing Clayey Sediments

Experimental Investigation on Methane Hydrate-Bearing Sediment Permeability under a Wide Range of Conditions

Effect of clay type and content on the mechanical properties of clayey silt hydrate sediments

Mechanical Behaviours of Gas-Hydrate-bearing Clayey Sediments of the South China Sea

Permeability Analysis of Hydrate-Bearing Sediments during the Hydrate Formation Process

Effect of Hydrate on Gas/Water Relative Permeability of Hydrate-Bearing Sediments: Pore-Scale Microsimulation by the Lattice Boltzmann Method

Experimental Study on the Effect of Porosity on the Elastic Properties of Methane Hydrate Formation

Undrained triaxial tests on water-saturated methane hydrate–bearing clayey-silty sediments of the South China Sea

Experimental Insights Into the In Situ Formation and Dissociation of Gas Hydrate in Sediments of Shenhu, South China Sea

Analyzing the Process of Depressurization-Induced Gas Production from Natural Marine Sediments

Dynamic permeability and gas production characteristics of methane hydrate-bearing marine muddy cores: Experimental and modeling study

Numerical simulations of depressurization‐induced gas production from hydrate reservoirs at site GMGS3‐W19 with different free gas saturations in the northern South China Sea

Numerical Analysis of Depressurization Production of Natural Gas Hydrate from Different Lithology Oceanic Reservoirs with Isotropic and Anisotropic Permeability