Abstract:As a clean energy source with ample reserves, natural gas hydrate is studied extensively. However, the existing hydrate production from hydrate deposits faces many challenges, especially the uncertain mechanism of complex multiphase seepage in the sediments. The relative permeability of hydrate-bearing sediments is key to evaluating gas and water production. To study such permeability, a set of pore-scale microsimulations were carried out using the Lattice Boltzmann Method. To account for the differences between hydrate saturation and hydrate pore habit, we performed a gas-water multiphase flow simulation that combines the fluids’ fundamental properties (density ratio, viscosity ratio, and wettability). Results show that the Lattice Boltzmann Method simulation is valid compared to the pore network simulation and analysis models. In gas and water multiphase flow systems, the viscous coupling effect permits water molecules to block gas flow severely due to viscosity differences. In hydrate-bearing sediments, as hydrate saturation increases, the water saturation S w between the continuous and discontinuous gas phase decreases from 0.45 to 0.30 while hydrate saturation increases from 0.2 to 0.6. Besides, the residual water and gas increased, and the capillary pressure increased. Moreover, the seepage of gas and water became more tedious, resulting in decreased relative permeability. Compared with different hydrate pore habits, pore-filling thins the pores, restricting the gas flow than the grain-coating. However, hydrate pore habit barely affects water relative permeability.
What problem does this paper attempt to address?
The key problem that this paper attempts to solve is the change mechanism of gas/water relative permeability in hydrate - bearing sediments (HBS). Specifically, the article focuses on how to simulate the flow characteristics of multiphase fluids at the pore scale by the Lattice Boltzmann Method (LBM) to evaluate the impact of hydrates on gas/water relative permeability. This helps to understand the complex multiphase seepage phenomena during natural gas hydrate extraction and provides theoretical support for improving extraction efficiency.
### Research Background and the Importance of the Problem
1. **Natural Gas Hydrate as a Clean Energy Source**: Natural gas hydrate (NGH) is a clean and abundant energy resource, and its total carbon content is equivalent to that of all fossil fuels. Therefore, NGH is regarded as a potentially important energy source in the future.
2. **Extraction Challenges**: However, extracting natural gas from hydrate reservoirs faces many challenges, especially the complex multiphase seepage mechanism is not yet clear. Gas/water relative permeability is a key parameter for evaluating gas and water production, so studying this parameter is crucial for optimizing the extraction process.
3. **Limitations of Existing Models**: Existing relative permeability calculation models (such as the modified Stone model and the van Genuchten model) only consider the influence of each phase saturation on relative permeability, ignoring the secondary influence of hydrate decomposition. In addition, experimental studies mainly focus on absolute permeability and lack research on gas/water relative permeability.
### Core Objectives of the Paper
- **Simulating Multiphase Fluid Flow**: Use the LBM method to conduct micro - scale simulations of gas/water two - phase fluids at the pore scale, combined with the basic properties of fluids (density ratio, viscosity ratio, and wettability), to study the influence of different hydrate saturations and pore morphologies on gas/water relative permeability.
- **Verifying the Effectiveness of the Simulation Method**: Verify the effectiveness of the LBM method by comparing it with the results of pore - network simulation and analysis models.
### Main Findings
1. **Influence of Hydrate Saturation**: As the hydrate saturation increases, the water saturation between the continuous gas phase and the discontinuous gas phase decreases from 0.45 to 0.30, while the residual water and gas increase, the capillary pressure increases, resulting in more difficult gas/water seepage and a decrease in relative permeability.
2. **Influence of Pore Morphology**: Compared with particle - coated hydrates, pore - filling hydrates will further narrow the pores, limit gas flow, but have a smaller impact on water relative permeability.
### Conclusion
Through the pore - scale micro - simulation of the LBM method, researchers can more accurately understand the influence of hydrates on gas/water relative permeability, providing theoretical basis and technical support for the efficient extraction of natural gas hydrates.