Abstract:Aqueous aluminum (Al)-air batteries (AABs) are gaining significant attention due to their excellent theoretical performance. However, the self-corrosion of the aluminum anode reduces anodic efficiency and battery capacity, limiting the broad commercial application of AABs. Herein, we propose the utilizing Allium Mongolicum Regel (AMR) extract as a green electrolyte additive to optimize the Al anode/electrolyte interface in alkaline AABs. Our findings indicate that the incorporation of AMR into NaOH electrolyte offers an effective strategy for preventing the self-corrosion of the Al anode, leading to significant enhancements in battery performance. Electrochemical experiments demonstrate that AMR achieves an inhibition efficiency of 53.9%. Through in-situ optical microscopy and in-situ attenuated total reflection Fourier-transform infrared spectroscopy, it is observed that the introduction of AMR can retard pitting corrosion by adsorbing onto the Al surface. This leads to a significant increase in specific capacity, from 1096 to 1667 mAh g −1 , compared with the electrolyte without AMR for AABs. Further analysis utilizing X-ray photoelectron spectroscopy, quantum chemical calculations, and ab-initio molecular dynamics determine that 4-hydroxycinnamamide (4-HCAA) and flavone molecules, which are the most active components of AMR, can bind with Al atoms through the carbonyl O functional group, forming an O–Al–O bond, thus suppressing the self-corrosion of the Al anode. The incorporation of the AMR extract into the electrolyte of AABs represents a sustainable approach for optimizing battery performance. This innovative strategy addresses a critical issue in the development of AABs, potentially creating new opportunities for their commercialization and widespread utilization as a reliable energy storage technology.

Chrysanthemum coronarium leaves extract as an eco-friendly corrosion inhibitor for aluminum anode in aluminum-air battery

Effect of Collard Greens Extract as an Electrolyte Additive on the Performance of Aluminum-Air Batteries

Green interface optimization strategy based on allium mongolicum regel extract for enhanced alkaline Al-air battery performance

Synergistic regulating the aluminum corrosion by ellagic acid and sodium stannate hybrid additives for advanced aluminum-air battery

Anode Interfacial Layer Construction Via Hybrid Inhibitors for High-Performance Al-Air Batteries.

Simultaneous Regulation on Electrolyte Structure and Electrode Interface with Glucose Additive for High-Energy Aluminum Metal-Air Batteries

Synergistic Effects of Carboxymethyl Cellulose and Zno As Alkaline Electrolyte Additives for Aluminium Anodes with A View Towards Al-Air Batteries

Effect of cetyl trimethyl ammonium bromide as an electrolyte additive on secondary discharge performance of aluminum-air battery

Synergistic modulation of alkaline aluminum-air battery based on localized water-in-salt electrolyte towards anodic self-corrosion

Effect of Tween 85 and Calcium Malate As Hybrid Inhibitors on the Performance of Alkaline Aluminum-Air Batteries

Influences of L-Cysteine/Zinc Oxide Additive on the Electrochemical Behavior of Pure Aluminum in Alkaline Solution

Effects of flocculant and corrosion inhibitor compounding on the electrochemical corrosion behavior of the anode in Al-air batteries

Hybrid Organic–Inorganic Additive for Robust Al Anode in Alkaline Aluminum–Air Battery

Inhibitive effect of quaternary ammonium-type surfactants on the self-corrosion of the anode in alkaline aluminium-air battery

Electrospun Al2O3 Film As Inhibiting Corrosion Interlayer of Anode for Solid Aluminum–Air Batteries

Effect of multifunctional composite additives on the anodic hydrogen evolution reaction in alkaline Al-air batteries

Improvement of Electrochemical Performance with Cetylpyridinium Chloride for the Al Anode of Alkaline Al-Air Batteries

A Promising Hybrid Additive for Enhancing the Performance of Alkaline Aluminum-Air Batteries

Effect of cerium acetate and L-glutamic acid as hybrid electrolyte additives on the performance of Al–air battery

Synergistic Effect of Vanadate and Nanoclay Hybrid Inhibitor on the Self-Corrosion and Discharge Activity of Al Anode in Alkaline Aluminum-Air Batteries

Effect of an Imidazole-Based Ionic Liquid As Anti-Corrosion Additive on the Performance of Al-air Batteries