Abstract:Abstract This paper analyses the flow characteristics and oil-air distributions of oil flows in a tilting-pad journal bearing under different bearing loads. This titling-pad journal bearing is working at 3000 rpm rotation speed and its minimum film thicknesses have been measured under different loads from 180 kN to 299 kN. Based on the previous researches of this bearing under 180 kN, the gaseous cavitation and low-turbulence flow exists in this bearing flow. A suitable gaseous cavitation model and the SST model with low-Re correction are used in the film flow simulations. With the rotor and pads assumed to be rigid, the dynamic mesh and motion equations are applied to simulate the motions of the rotor and the rotations of the pads. Based on the simulation results under different bearing loads, the simulated minimum film thicknesses agrees well with the measured data. It indicates that the simulation results can catch the film geometries and flows correctly. With the load increasing, the rotor moves closer to the loaded pads and the minimum film thickness decreases. Taking the effect of boundary layers into consideration, the turbulence has a negative relationship with the film thickness and decreases in the loaded area under higher bearing load. It can be verified by the simulated lower turbulent viscosity ratio distributions in the loaded pads. In the unloaded area, both the film thickness and turbulence viscosity ratio are positively related to the bearing loads. Thus, the higher bearing load may lead the flow to be more different in the loaded and unloaded area, and the turbulence in the loaded pads may transfer to laminar in the end. As for the oil-air distributions, in the unloaded pads, with the bearing load increasing, the simulated air volume fraction increases in the unloaded pads with lower pressure. It should be caused by the higher film thickness of the unloaded pads under higher loads. In sum, the flow turbulence and cavitation process changes with the bearing load. With a higher load, the cavitation becomes more in the unloaded pads and the flow changes sharper from the high-turbulence unloaded area to the low-turbulence loaded area. As the simulation results is in good accordance with the experimental data, the SST model with low-Re correction and the gaseous cavitation model are verified to be suitable for bearing film simulations under different loads.

Numerical Study of Thermohydrodynamic Characteristics of Oil Tilting-Pad Journal Bearings with a Self-Pumping Fluid Flow Circulation

A Numerical Investigation of Mixed Thermal Elastohydrodynamic Lubrication in Tilting-Pad Journal Bearing

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

Study on the thermoelastohydrodynamic performance of tilting-pad bearings for large-scale power units

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Numerical Investigation for Characteristics and Oil-Air Distributions of a Tilting-Pad Journal Bearing Under Different Loads

Theoretical and Experimental Investigations on Directly Lubricated Tilting Pad Journal Bearing under Starved Lubrication

Analytical Method for Hydrodynamic Force in Finite-Length Tilting-Pad Journal Bearing Including Turbulence Effect

Thermoelastohydrodynamic Analysis of the Static Performance of Tilting-Pad Journal Bearings with the Newton–Raphson Method

Series Solution of the Reynolds Equation in Finite-Length Tilting-Pad Journal Bearing Including Pad Deformation

Numerical Investigation for Characteristics and Oil–air Distributions of Oil Film in a Tilting-Pad Journal Bearing

Study on Thermal Elastohydrodynamic Lubrication of Large Hybrid Tilting-Pad Journal Bearings

Thermohydrodynamic Study on Journal Bearings Using Finite Element Analysis

Numerical simulations for the fluid-thermal-structural interaction lubrication in a tilting pad thrust bearing

Rapid Solution for Analysis of Nonlinear Fluid Film Force and Dynamic Behavior of a Tilting-Pad Journal Bearing-Rotor System with Turbulent and Thermal Effects

Influence on temperature profile in an oil film in thrust bearings using an embedded cooling circuitry beneath the pad surface: An experimental investigation

Study on adiabatic transient behavior of tilting-pad journal bearing

Investigation on static and dynamic characteristics of high-speed and heavy-load tilting pad journal bearings

The Impact of Installation Deviation on the Lubricating Characteristics of a 1000 MW Giant Hydropower Unit’s Tilting-Pad Journal Bearing

Thermo-hydrodynamic Lubrication and Energy Dissipation Mechanism of a Pump-Turbine Thrust Bearing in Load-Rejection Process

Friction Power Analysis and Improvement for a Tilting-Pad Journal Bearing Considering Air Entrainment