Friction welding of titanium alloys: addressing the structural integrity issues through process optimisation

M.M. Attallah,M. Preuss,S.E. Bray

DOI: https://doi.org/10.1533/978-1-78242-164-1.313

2013-01-01

Abstract:Friction welding (FW), with its three common variations (linear friction, friction stir, and rotary friction), provides a unique approach for joining titanium alloys due to the localised heat input associated with these techniques. Nonetheless, FW is known to result in a number of structural integrity issues due to the metallurgical and physical nature of Ti-alloys. First, due to the low thermal conductivity of titanium, its friction welds are typically associated with large residual stresses. Secondly, due to the severe thermomechanical deformation during friction welding, the welds are known to develop strong α-textures. Finally, the α→β phase transformation that occurs during welding, and the subsequent transformation of the α phase to α′ or α″ martensite results in a microstructural inhomogeneity across the weld regions that can be difficult to eliminate by post-weld heat treatment. In this presentation, an overview will be given on how these three concerns can be addressed through optimising the process parameters to control the texture, residual stress development, as well as the microstructure-property inhomogeneity across the welds regions. The work utilises a number of advanced characterisation techniques, including synchrotron X-ray diffraction and electron microscopy