Abstract:Concrete, an indispensable cornerstone of the construction industry, presents a formidable environmental challenge owing to the substantial carbon dioxide (CO 2 ) emissions incurred during the production of cement. However, in light of the construction sector's vital economic and social contributions, it becomes imperative to harmonize it with environmental preservation. The concept of sustainability emerges as a paramount principle, addressing pressing issues such as the escalating depletion of non-renewable resources and the imperative need for resource conservation to secure a sustainable legacy for future generations. In this particular context, the prudent utilization of sustainable materials stands out as a pragmatic approach to ameliorate the adverse environmental impacts inherent in cementitious systems, while concurrently enhancing the structural strength and durability of constructions. The subject of this study is centered on the strategic incorporation of recycled concrete powder (RCP), marble powder (MP), glass powder (GP), and limestone powder (LP) as viable substitutes for traditional cement, at varying rates of 25%, 30%, and 35%, with the overarching goal of augmenting sustainability in construction practices. The outcomes of the experimental investigation unveiled significant insights. The inclusion of these waste powders yielded a noteworthy maximum reduction of 44% in compressive strength, albeit it necessitated a maximum increase of 16% in the application of admixtures. Nevertheless, a crucial advantage emerged in the substantial reduction, to the tune of 72%, in the deleterious alkali–silica reaction. Moreover, in terms of workability, while the control mixture experienced a 20% reduction in flow value after 60 min, mixtures infused with waste powders showcased a range of flow value reductions spanning from 23 to 40%. In summary, the study emphasizes that the replacement of conventional cement with waste powders, despite causing acceptable adverse effects on workability, admixture requirements, and strength properties, leads to significant enhancements in alkali-silica reaction resistance. This, in turn, bestows substantive benefits upon the overarching goal of sustainability enhancement within the construction industry.

Alkaline activation of mortars made from solid construction waste [Activación alcalina de morteros fabricados a partir de residuos sólidos de construcción]

Reusing Construction and Demolition Waste to Prepare Alkali-Activated Cement

Development of Alkaline-Activated Self-Leveling Hybrid Mortar Ash-Based Composites

Reuse of Powders and Recycled Aggregates from Mixed Construction and Demolition Waste in Alkali-Activated Materials and Precast Concrete Units

Effect of Thermoactivated Recycled Cement, Hardened Cement Powder and Hydrated Lime on the Compressive Strength of Mortars

Explorative Study into Alkali-Activated Repair Mortars Using Blast Furnace Slag and Glass Waste

Development of Sustainable Cement-Based Materials with Ultra-High Content of Waste Concrete Powder: Properties and Improvement

Accelerating the Reaction Kinetics of Na2CO3-Activated Slag Mortars by Calcined Recycled Concrete Fines

Exploratory study for the alkaline activation of basalt powder as a supplementary cementitious matrix

Performance Enhancement of Alkali-Activated Electric Arc Furnace Slag Mortars through an Accelerated CO2 Curing Process

Effect of the Addition of Agribusiness and Industrial Wastes as a Partial Substitution of Portland Cement for the Carbonation of Mortars

Formulation parameters effects on the performances of concrete equivalent mortars incorporating different ratios of recycled sand

Mechanical and Durability Properties of Mortars Incorporating Red Mud, Ground Granulated Blast Furnace Slag, and Electric Arc Furnace Dust

Strength, Fracture and Durability Characteristics of Ambient Cured Alkali—Activated Mortars Incorporating High Calcium Industrial Wastes and Powdered Reagents

Waste-Based One-Part Alkali Activated Materials

Microstructures and properties of alkali-activated slags with composite activator: Effects of Na2O equivalents

Influence of recycled concrete, marble, glass, and limestone powder, and utilization ratios on the compressive strength and alkali–silica reaction performance of mortar mixtures

The potential of one-part alkali-activated materials (AAMs) as a concrete patch mortar

Structure, morphology and compressive strength of Alkali-activated mortars containing waste bottle glass nanoparticles

Recycling of Glass Cullet and Glass Powder in Alkali-Activated Cement: Mechanical Properties and Alkali–Silica Reaction

Development of Mortars That Use Recycled Aggregates from a Sodium Silicate Process and the Influence of Graphene Oxide as a Nano-Addition