Abstract:Background Large reported variability in the material composition and geometrical components of the Xoft electronic high‐dose‐rate brachytherapy Causes inter‐source discrepancy in the source output. This variability is due to the manual manufacturing and assembly of the sources. Purpose This study aimed to develop a dosimetry software tool called E‐Brachy to characterize the Xoft source and quantify the discrepancies in its photon spectrum and dosimetric properties. Methods E‐Brachy is based on the Geant4 Monte Carlo toolkit and consists of two parts. In part one, the geometry and material composition for the source received in the computer‐aided design format from the vendor were converted to the geometry description markup language format using the GUIMesh Python tool and integrated into the E‐Brachy software. There was a large variation in material composition and thickness for some of the tube components. The simulation started from electrons and resulted in x‐ray generations in the anode region. Multithreading, a track length estimation, and the uniform bremsstrahlung splitting variance reduction techniques were used to decrease the simulation time and increase the x‐ray production. The photon energy, position, and momentum were saved into a phase space file as the photon exited the source, but before interacting with the external environment. The obtained x‐ray energy spectrum was compared with measurements from the National Institute of Standards and Technology (NIST). In part two, by sampling from the generated photons, the dose rates and dosimetric parameters according to the TG‐43 protocol were calculated for model S7500 and compared to the ones previously calculated for model S700 source, which were deemed identical by the manufacturer. Results The material composition that resulted in the most similar spectrum as the measured NIST spectrum with Pearson's correlation coefficient of 0.99 and a calculated Euclidean difference of 0.061±0.001 keV was chosen for further dosimetric analysis of the model S7500 source. Characteristic peaks showed the presence of tungsten, yttrium, and silver in the source components. Differences in dose rates between the two source models surpassed 20% for polar angles θ≥150∘ , reaching a peak at r=3 cm and θ=175∘ . The differences in the radial dose function values were within 5%. The relative difference in percentage between the anisotropy function values of the two models was closer to 0 for smaller θ values, but at higher polar angles, they increased to 300%. Conclusions A software package called E‐Brachy was successfully developed for the characterization and dosimetry of Xoft electronic brachytherapy sources. E‐Brachy can be combined with spectral measurements to investigate the inter‐ and intra‐source variability. The software package was tested by comparing the simulated spectra from the S7500 Xoft source model with NIST measurements and its TG‐43 parameters with the S700 model. The TG‐43 parameters between the two sources significantly exceed the recommendations of TG‐56.

New National Air-Kerma Standard for Low-Energy Electronic Brachytherapy Sources

Air kerma reference field with high energy photons using a 15 MeV electron beam from a clinical linear accelerator

The Measurement of the Air-Kerma Rate in Air and a Solid Phantom with Ionization Chambers for a 192ir HDR Brachytherapy Source

Design and Dosimetric Characteristics of a New Endocavitary Contact Radiotherapy System Using an Electronic Brachytherapy Source.

Beam Energy Considerations for Gold Nano-Particle Enhanced Radiation Treatment

Investigation of Dosimetric Parameters of $^{192}$Ir MicroSelectron v2 HDR Brachytherapy Source Using EGSnrc Monte Carlo Code

Dosimetry of a novel converging X‐ray source for kilovoltage radiotherapy

Characterization of the new free-air primary standard for medium-energy X-rays at CMI

Key comparison BIPM.RI(I)-K8 of high dose-rate 192 Ir brachytherapy standards for reference air kerma rate of the LNE-LNHB and the BIPM

On the Assay of Brachytherapy Sources.

Monte Carlo-aided dosimetry of a new high dose-rate brachytherapy source

Personnel exposure during gamma endovascular brachytherapy

Technical assessment of a mobile CT scanner for image-guided brachytherapy

SU-FF-T-48: A Study of the Impact of X-Ray Energy and Angular Distributions Produced From 6- and 18-MV Medical Linear Accelerators On Non-Target Exposures

Challenges for the Implementation of Primary Standard Dosimetry in Proton Minibeam Radiation Therapy

SU-D-144-06: Dosimetric Characterization of a Prototype Nanotechnology Microbeam Radiation Therapy Device Using Gafchromic EBT2 Film

Quality assurance measurements for high-dose-rate brachytherapy without film

A Clinical Monte Carlo Dosimetric Evaluation in Accelerated Partial Breast Electronic Brachytherapy

E‐Brachy: New dosimetry package for electronic brachytherapy sources

Clinical microbeam radiation therapy with a compact source: specifications of the line-focus X-ray tube

On the neutron radiation field and air activation around a medical electron linac