Abstract:Portland cements (PCs) and cement blends are multiphase materials of different fineness, and quantitatively analysing their hydration pathways is very challenging. The dissolution (hydration) of the initial crystalline and amorphous phases must be determined, as well as the formation of labile (such as ettringite), reactive (such as portlandite) and amorphous (such as calcium silicate hydrate gel) components. The microstructural changes with hydration time must also be mapped out. To address this robustly and accurately, an innovative approach is being developed based on in situ measurements of pastes without any sample conditioning. Data are sequentially acquired by Mo Kα1 laboratory X-ray powder diffraction (LXRPD) and microtomography (µCT), where the same volume is scanned with time to reduce variability. Wide capillaries (2 mm in diameter) are key to avoid artefacts, e.g. self-desiccation, and to have excellent particle averaging. This methodology is tested in three cement paste samples: (i) a commercial PC 52.5 R, (ii) a blend of 80 wt% of this PC and 20 wt% quartz, to simulate an addition of supplementary cementitious materials, and (iii) a blend of 80 wt% PC and 20 wt% limestone, to simulate a limestone Portland cement. LXRPD data are acquired at 3 h and 1, 3, 7 and 28 days, and µCT data are collected at 12 h and 1, 3, 7 and 28 days. Later age data can also be easily acquired. In this methodology, the amounts of the crystalline phases are directly obtained from Rietveld analysis and the amorphous phase contents are obtained from mass-balance calculations. From the µCT study, and within the attained spatial resolution, three components (porosity, hydrated products and unhydrated cement particles) are determined. The analyses quantitatively demonstrate the filler effect of quartz and limestone in the hydration of alite and the calcium aluminate phases. Further hydration details are discussed.

Using PHREEQC to model cement hydration

Mix and measure II: joint high-energy laboratory powder diffraction and microtomography for cement hydration studies

Advances in understanding hydration of Portland cement

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State

Prediction of Effective Chloride Diffusivity of Cement Paste and Mortar from Microstructural Features

A COMSOL-PHREEQC Interface for Modeling the Multi-Species Transport of Saturated Cement-Based Materials

Hydration mechanism and thermodynamic simulation of ecological ternary cements containing phosphogypsum

Analytical Equations and Numerical Simulation Describing the Pore and Solid Phase Distributions of Interfacial Transition Zones in Cement-Based Materials

Mathematical modeling of cement hydration process and microstructure development

Machine learning enables prompt prediction of hydration kinetics of multicomponent cementitious systems

Programmatic Data Analysis for Quantitative Isothermal Heat Flow Calorimetry of Cementitious Materials

Hydration of Portland cement with seawater toward concrete sustainability: Phase evolution and thermodynamic modelling

Analytical Solution for Predicting the Elastic Modulus of a Cement Slurry System with the Effect of Calcium Dissolution

Thermodynamic Modeling of the Essential Physicochemical Interactions Between the Pore Solution and the Cement Hydrates in Chloride-Contaminated Cement-Based Materials.

Prediction of the Chemical Shrinkage of Portland Cement

Toward smart and sustainable cement manufacturing process: Analysis and optimization of cement clinker quality using thermodynamic and data-informed approaches

Early Hydration Properties and Reaction Kinetics of Multi-Composite Cement Pastes with Supplementary Cementitious Materials (Scms)

A model of phase stability, microstructure and properties during leaching of portland cement binders

The Early Hydration of OPC Investigated by In-Situ XRD, Heat Flow Calorimetry, Pore Water Analysis and 1H NMR: Learning about Adsorbed Ions from a Complete Mass Balance Approach

Modeling of Heat and Mass Transfer in Cement-Based Materials during Cement Hydration—A Review

Isothermal Calorimetry Tests and Modeling of Cement Hydration Parameters