Abstract:The development of selective catalytic reduction catalysts by NH3(NH3-SCR) with excellent low-temperature activity and a wide temperature window is highly demanded but is still very challenging for the elimination of NOx emission from vehicle exhaust. Herein, a series of sulfated modified iron-cerium composite oxide Fe1-xCexOδ-S catalysts were synthesized. Among them, the Fe0.79Ce0.21Oδ-S catalyst achieved the highest NOx conversion of more than 80% at temperatures of 175-375 °C under a gas hourly space velocity of 100000 h-1. Sulfation formed a large amount of sulfate on the surface of the catalyst and provided rich Brønsted acid sites, thus enhancing its NH3 adsorption capacity and improving the overall NOx conversion efficiency. The introduction of Ce is the main determining factor in regulating the low-temperature activity of the catalyst by modulating its redox ability. Further investigation found that there is a strong interaction between Fe and Ce, which changed the electron density around the Fe ions in the Fe0.79Ce0.21Oδ-S catalyst. This weakened the strength of the Fe-O bond and improved the lattice oxygen mobility of the catalyst. During the reaction, the iron-cerium composite oxide catalyst showed higher surface lattice oxygen activity and a faster replenishment rate of bulk lattice oxygen. This significantly improved the adsorption and activation of NOx species and the activation of NH3 species on the catalyst surface, thus leading to the superior low-temperature activity of the catalyst.

Sol-gel preparation of mesoporous cerium-doped FeTi nanocatalysts and its SCR activity of NOx with NH3 at low temperature

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Highly Efficient Fe-Cu/CL Catalysts Based on Low-Cost Clay Minerals for NH3-SCR of NOx at Low Temperature

Ceria modified MnOx/TiO2 as a superior catalyst for NO reduction with NH3 at low-temperature

DRIFT Study of CuO-CeO₂-TiO₂ Mixed Oxides for NOx Reduction with NH₃ at Low Temperatures.

CeO2 doping boosted low-temperature NH3-SCR activity of FeTiOx catalyst: A microstructure analysis and reaction mechanistic study

DRIFT Study of CuO–CeO2–TiO2 Mixed Oxides for NOx Reduction with NH3 at Low Temperatures

The activity and characterization of CeO2-TiO2 catalysts prepared by the sol-gel method for selective catalytic reduction of NO with NH3.

Revealing the Excellent Low-Temperature Activity of the Fe 1- x Ce x O δ -S Catalyst for NH 3 -SCR: Improvement of the Lattice Oxygen Mobility

Preparation and characterization of CeO2/TiO2 catalysts for selective catalytic reduction of NO with NH3

High Resistance of SO2 and H2O over Monolithic Mn-Fe-Ce-Al-O Catalyst for Low Temperature NH3-SCR

Novel Homogeneous and Mesoporous MnOx-Doped Ceria Nanosheets As Catalysts for Low-Temperature Selective Catalytic Reduction

CeO2 Nanoparticle-Loaded MnO2 Nanoflowers for Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

The selective catalytic reduction of NO over Ce0.3TiOx-supported metal oxide catalysts

Fabrication of wide temperature FexCe1-xVO4 modified TiO2-graphene catalyst with excellent NH3-SCR performance and strong SO2/H2O tolerance

Single-Atom Ce-Modified Α-Fe2o3 for Selective Catalytic Reduction of NO with NH3.

Remarkable Enhancement in the N-2 Selectivity of NH3-SCR over the CeNb3Fe0.3/TiO2 Catalyst in the Presence of Chlorobenzene

Revealing the Excellent Low-Temperature Activity of the Fe1–xCexOδ-S Catalyst for NH3-SCR: Improvement of the Lattice Oxygen Mobility

Mn and Fe oxides co-effect on nanopolyhedron CeO2 catalyst for NH3-SCR of NO

Facile Preparation of High-Performance Fe-doped Ce–Mn/TiO2 Catalysts for the Low-Temperature Selective Catalytic Reduction of NOx with NH3

Improvement of sulfur and water resistance with Fe-modified S-MnCoCe/Ti/Si catalyst for low-temperature selective catalytic reduction of NO with NH3