Abstract:Suspension bridges have become increasingly popular in recent decades due to their attractive look, effective use of structural materials, and other noteworthy features. The popularity of suspension bridges has skyrocketed among bridge engineers. These bridges are earthquake-resistant and have excellent spanning capacities. They reduce the quantity of foundation excavation and obviate the need for tall piers. Suspension bridges are hence the preferable choice when constructing long-span bridges. The interaction between the bridge and the vehicle makes it difficult to predict how a bridge will react to a moving vehicle. In addition to wind and earthquake loads, high-speed vehicle vibration must also be taken into account when designing bridges for earthquake resistance. The main goal of this study is to investigate how a multi-span suspension bridge structure responds dynamically to vehicles moving at various speeds in terms of displacement, velocity, and acceleration. In the past, the majority of research has focused on the bridge's dynamic or impact reaction rather than the response of the moving cars. This paper proposes a modeling approach for the evaluation of a multi-span suspension bridge with an orthotropic steel-box deck using the finite-element method and analyzes the various dynamic response properties of the bridge when it is loaded in accordance with various IRC loading instances, such as IRC Class A vehicle loadings and IRC 70R wheeled vehicle loading cases. Using ANSYS, finite-element method-based software, a three-dimensional finite-element model has been created. The bridge has been assessed at average vehicle speeds between 50 and 200 km/h. The proposed findings can be implemented as a revision to the IRC requirements for both short- and long-span highway bridges. The results of this investigation indicate that the vehicle’s speed has a significant impact on the dynamic responses of the bridge. The values of total acceleration, total velocity, and equivalent stress are maximum in case of IRC Class 70R wheeled ‘M’ type vehicle loading 86.626 mm/sec2, 61.944 mm/sec, and 33.094 MPa, respectively. The modeling approach described above can be used to examine any multi-span suspension bridge.

Dynamic Response and Identification of Critical Points in the Superstructure of a Vehicle Using a Combination of Numerical and Experimental Methods

Remote Collaborative Pseudo-dynamic Tests of a Ten-story Concrete Filled Steel Tubular Composite Frame

Incorporating Site-Specific Weigh-in-motion Data into Fatigue Life Assessment of Expansion Joints under Dynamic Vehicle Load

Prediction of dynamic stresses using flexible multibody system algorithms: Application to tracked vehicle upper structure

Optimal Modeling of an Elevator Chassis under Crash Scenario Based on Characterization and Validation of the Hyperelastic Material of Its Shock Absorber System

Dynamic Characteristics and Multi-support Seismic Response Analysis of a Super-large-span Suspension Bridge

Structural damage identification based on dynamic deflection sensitivity of bridge under vehicle loading

Full Vehicle Durability Analysis by Means of the IDIADA Virtual Proving Ground

Dynamic response of a multi-span suspension bridge subjected to highway vehicle loading

Non-Invasive Identification of Vehicle Suspension Parameters: A Methodology Based on Synthetic Data Analysis

Structural Fatigue Strength Evaluation of Commercial Vehicle Structures by Calculating Damage Due to Road Load Inputs

Frame loads accuracy assessment of semianalytical multibody dynamic simulation methods of a recreational vehicle

Optimization of structural parameters through objective-evaluation of ride comfort in a heavy-duty commercial vehicle

Nonlinear dynamics of viscoelastic flexible structural systems by finite element method

Dynamic Analysis of Car Suspension Using ADAMS/Car for Development of a Software Interface for Optimization

Dynamic Analysis and Optimization of Vehicle-Bridge Interaction System under Road Roughness and Time Variability of Element Interpolation Function

Verifying the suitability of uncoupled numerical methods for solving vehicle-bridge interaction problems

DYNAMIC LOADING EFFECTS ON CAR SUSPENSION COMPONENTS DURING ROAD DRIVING

Rigid-Elastic Coupling Modelling Of Air Suspension And Fatigue Life Prediction Of Its Key Part For Heavy-Duty Truck

Dynamic research on higih-pier & long-span continuous rigid frame bridge from overload vehicle

A high cycle fatigue numerical framework for component-level virtual fatigue testing: Application to a light-duty vehicle lower control arm