Abstract:Failure response of the modern high strength steel grades shows a diverse pattern compared to the conventional highly ductile steels. In automotive sheet forming applications of the high strength steels, fracture could be observed prior to necking or the post necking deformation is very limited. The differences in the underlying damage mechanisms contribute to the different ways of damage development and the interaction of damage with plastic localization and strain hardening creates various failure patterns. Therefore, it is critical to clearly identify the phase for damage initiation and understand the relation between plastic localization, damage and fracture, as these patterns significantly influence the safety assessment in the forming process of steels. Inverse modelling approaches are being used to bridge the gap between experiments and numerical simulations. However, this technique shows significant discrepancies when strain heterogeneity is experienced, especially since the determination of the material parameters is based on comparison on a global scale with force and elongation measurements. An iterative finite element model update (FEMU) procedure integrated with optical full field measurement technique was executed which extended the possibilities to identify the material ductile damage and fracture behavior on a local level with significantly higher accuracy. To identify the material plastic and damage behavior of the automotive dual phase steel (DP-K1000) under study, experiments are conducted on dog-bone, notched tensile, central hole and shear specimens at various strain rates. Full field deformation data was obtained by digital image correlation (DIC). A vigorous and general framework for the inverse identification of the strain hardening behavior up to fracture of the automotive high strength steel was studied. A hybrid damage mechanics model (extended Modified Bai-Wierzbicki) that combines a phenomenological criterion for damage initiation related to the microstructure degradation of materials and a continuum damage mechanics based damage evolution law for progressive damage accumulation till final fracture is employed using a VUMAT in the finite element (FE) scheme. To exclude the convergence (plastic instability) problems, a displacement driven finite element simulation was used while minimizing the discrepancy between the experimental and numerical surface strain fields and force values. A visual mapping procedure was adopted to realize identical reference frames and therefore identical peripheries for the specimen in DIC and FE model. This mapping includes a transformation and interpolation function from FE results to the DIC datum points. Successful identification of the material parameters was achieved based on a combined Gauss-Newton and Levenberg-Marquardt algorithm which require the evaluation of the gradient of the objective function to update the unknown parameters in an appropriate direction. The optimization problem of the inverse modelling in the current work was described by a cost function based on the least square norm of the differences of the surface strain fields. Overall cost function formulation is not dependent on the experimental or finite element meshes and includes rigid body motions. The residual was minimized at once for all the displacements by Gauss-Newton scheme in space-time, which is defined by spatial domain and temporal domain. The optimization of the constitutive parameters was directly achieved by minimizing this image residual in an iterative manner. The adopted methodology helped in determining macroscopic crack initiation instant and location from experiments. Local variables such as equivalent plastic strain, stress triaxiality and Lode angle parameter were evaluated from the critical element for the determination of the damage initiation locus which was then fitted by a non-linear least squares method with a trust-region algorithm in Matlab. The identified damage initiation locus and plastic localization phenomena served as an evaluation criteria for the formability of the dual phase automotive steel.

A high cycle fatigue numerical framework for component-level virtual fatigue testing: Application to a light-duty vehicle lower control arm

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

Numerical simulation of low cycle fatigue behavior, combining the phase‐field method and the Armstrong‐Frederick model

Numerical simulation of a rapid fatigue test of high Mn-TWIP steel via a high cycle fatigue constitutive law

Fatigue safety design of automotive suspension links by using computer aided engineering static analysis

Full Vehicle Durability Analysis by Means of the IDIADA Virtual Proving Ground

Fatigue analysis for the aluminum alloy 7050-T7451 performed by a two scale continuum damage mechanics model

Experimental and simulation analysis of fatigue life of aluminum 6061-T6 alloy

Structural Fatigue Strength Evaluation of Commercial Vehicle Structures by Calculating Damage Due to Road Load Inputs

Fatigue crack propagation at aeronautic engine vane guides using the extended finite element method (XFEM)

Assessment of the locations of fatigue failure in a commercial vehicle cab using the virtual iteration method

FINITE ELEMENT SIMULATION AND TEST FOR FATIGUE LIFE OF COMMERCIAL VEHICLE DRIVING AXLE HOUSING

Experimental and Numerical Investigation of High-Temperature Multi-Axial Fatigue

Numerical-experimental procedure for predicting fatigue life in SAE AMS 7475-T7351 aluminum alloy considering the effect of stress ratio

Modeling of progressive high-cycle fatigue in composite laminates accounting for local stress ratios

Fatigue failure prediction through Factor of Safety and Stress concentration in a malfunctioned AISI 4140 Automotive Crankshaft

An efficient/accurate multi-scale fatigue prediction method for Metal-Polymer hybrid (MPH) interface

Revealing plastic localization and ductile damage initiation features with integrated DIC and FEM

Predicting Stress Intensity Factor for Aluminum 6062 T6 Material in L-Shaped Lower Control Arm (LCA) Design Using Extended Finite Element Analysis

Research on the structural performance and fatigue life analysis of commercial vehicle stabilizer bars

Simulating fatigue damage on planar mechanisms considering wear in revolute joints with clearance