Abstract:Amongst various porous media, open-cell metallic foams exhibit distinctive properties: relatively low manufacturing cost, ultra-low density, moderate stiffness and strength, and high surface area-to-volume ratio. They have been, therefore, utilized in a variety of applications such as microelectronics cooling, fuel cells, and compact heat exchangers. For such applications, the knowledge of pressure drop of fluid flowing across the foam is often a key issue, enabling control of fluid flow, heat transfer enhancement, planning and designing chemical engineering processes, optimal flow analysis as well as practical designs. We present in this paper an analytical model capable of predicting the pressure drop of a Newtonian incompressible fluid flowing unidirectionally across isotropic and fully-saturated micro open-cell cellular foams within the Darcy and Forchheimer flow regimes. Analytical exploitations are conducted to determine the foam permeability and inertial coefficient. The analytical model is based on the basis of volume-averaging approach and the assumption of piece-wise plane Poiseuille flow with the modified cubic lattice with spherical node at the junction of struts. To better mimic the foam struts shape, a concave-triangular-shaped strut consisting of two nose-to-nose cones is considered and particular attentions have been paid to both analytically and numerically examine the node shape as well as struts shape effect. Built upon a generalized tortuosity model derived from the modified cubic unit cell, an analytical model of permeability on the basis of a cubic unit cell is developed, valid within a typical engineering range of porosity (ε = 0.86 ∼ 0.98) and pore size (0.254 mm ∼ 5.08 mm). With the effect of Reynolds number considered, the pore-scaled Reynolds number dependent drag coefficient expression is introduced and through this the inertial coefficient is analytically modeled on the basis of flow over bluff bodies, which is found to agree well with experimental data from various sources. The modeling procedure for pressure drop (permeability and inertial coefficient) is based on physical principles and geometrical considerations, and the model predictions agree satisfactorily with existing experimental data. Results show that by building the analytical model on the basis of a cubic unit cell to represent the topology of metallic foams, pressure drops as well as hydrodynamic conditions within both the Darcy and Forchheimer regimes in a Newtonian fluid can be analytically predicted.

Characterization of An Open-Pored Nickel Foam with Respect to Aerosol Filtration Efficiency by Means of Measurement and Simulation

Pore-Scaled Analytical Modelling of Permeability and Inertial Coefficient for Pressure Drop Prediction of Open-Cell Metallic Foams

Tomography-based Analysis of Apparent Directional Spectral Emissivity of High-Porosity Nickel Foams

Numerical Comparison of Prediction Models for Aerosol Filtration Efficiency Applied on a Hollow-Fiber Membrane Pore Structure

Influence of Foam Morphology on Flow and Heat Transport in a Random Packed Bed with Metallic Foam Pellets-An Investigation Using CFD

Measurement of the Nanoparticles Distribution in Flat and Pleated Filters During Clogging

Efficient and Robust Metallic Nanowire Foams for Deep Submicrometer Particulate Filtration

Experimental study of particulate fouling in partially filled channel with open-cell metal foam

Electrostatically Assisted Metal Foam Coarse Filter with Small Pressure Drop for Efficient Removal of Fine Particles: Effect of Filter Medium

Experimental Investigation on the Pressure Drop of Air Flows Through Aluminum and Nickel-Chromium Metallic Foams for HVAC Applications

Microstructure-Dependent Particulate Filtration using Multifunctional Metallic Nanowire Foams

A 2-dimensional modelling of the coating process of nickel on polyurethane foam via electrodeposition

On the Hydrodynamics of Macroporous Structures: Experimental, CFD and Artificial Neural Network Analysis

Filtration efficiency analysis of fibrous filters: Experimental and theoretical study on the sampling of agglomerate particles emitted from a GDI engine

Characterisation and modification of the porous metal foams used for the EN 15051-2 dustiness rotating drum test

Microstructural Influence on Compressive Behavior and Strain Rate Sensitivity of Open-Cell Nickel Foam

A numerical modeling framework for predicting the effects of operational parameters on particle size distribution in the gas atomization process for Nickel-Silicon alloys

Pore-level Determination of Spectral Reflection Behaviors of High-Porosity Metal Foam Sheets

Numerical simulation of particle spatial distribution and filtration characteristic in the pleated filter media using OpenFOAM

An Approach to Determine Radiative Properties of Solid Struts of Open-Cell Foams by Pore Scale Identification from Macro Scale Measurements

Investigation of the Influence of Data Collection and Analysis Procedures on Aerosol Filtration Model Development