Abstract:The present study investigated the aging precipitation behavior and mechanical, electrical properties of Cu–15Ni–8Sn alloy affected by cold rolling with different deformations. During cold rolling, the grain is elongated gradually along rolling direction with increasing deformation, simultaneously accompanied by the occurrence of a great deal of dislocations and deformation twins. During aging process, the coherent DO22 and L12 ordered phases precipitate successively from the matrix after 90% rolling deformation and aging treatment at 400 °C for 0.5 h with the orientation relationship of <math>(1¯10)DO22</math> // <math>(022¯)Cu</math>, <math>[111]DO22</math> // <math>[211]Cu</math>; <math>(11¯1¯)L12</math>// <math>(11¯1¯)Cu</math>, <math>[211]L12</math> // <math>[211]Cu</math>. However, discontinuous precipitation (DP) behavior is significantly accelerated by prior cold rolling. On the one hand, by revealing the underlying growth kinetics of DP, it can be found that the nucleation sites of DP transform from grain edges to grain boundaries gradually with increasing rolling deformation. On the other hand, the nucleation sites and nucleation rate of DP can be enhanced greatly with increasing dislocation density. Furthermore, the interlamellar spacing of DP slightly increases and the morphology transforms from lamellar structure to bush-like structure gradually with increasing rolling deformation. In addition, the hardness, tensile strength and electrical conductivity are obviously improved while the peak aging time greatly shortens with increasing rolling deformation. The optimal combination of properties with a hardness of 409 HV, a yield strength of 1256 MPa, and an electrical conductivity of 7.5 %IACS can be obtained in the sample with 90% rolling deformation after aging treatment at 400 °C for 0.5 h. The corresponding strengthening mechanism and conductive mechanism were discussed. It can be discovered that the precipitation strengthening, dislocation strengthening and solid solution strengthening are believed to be the main strengthening mechanisms to enhance the alloy strength.

Precipitation kinetics of 2519A aluminum alloy based on aging curves and DSC analysis

Atomic-scale study on the precipitation behavior of an Al-Zn-Mg-Cu alloy during isochronal aging

Effects of cold-pre-rolling reduction on precipitation of 2519A aluminum alloy plate

Improving Precipitation in Cryogenic Rolling 6016 Aluminum Alloys during Aging Treatment

Effects of equal channel angular pressing and further cold upsetting process to the kinetics of precipitation during aging of 7050 aluminum alloy

Influence of Quench-Induced Precipitation on Aging Behavior of Al-Zn-Mg-Cu Alloy

Precipitation kinetics of second-phase particles in supersaturated solid solution of 7050 aluminum alloy

Microstructure evolution, mechanical response, and corrosion resistance for a 2195 Al-Li alloy under different rolling reductions during cryorolling

Effect of heat treatment on the microstructure and mechanical properties of cryogenic rolling 2195 Al–Cu–Li alloy

Modelling precipitation kinetics and investigating age-hardening behaviour of 2219Al alloys microalloyed with Cd

Effect of cold rolling on aging precipitation behavior and mechanical properties of Cu–15Ni–8Sn alloy

Aging behavior of an Al–Cu–Mg alloy

Effect of Cold Deformation on Precipitation of 7050 Aluminum Alloy During Aging Process

Microstructure evolution and mechanical properties of Al−3.6Cu−1Li alloy via cryorolling and aging

Effect of Aging Temperature on Microstructures and Precipitation Hardening in Ti1023 and Ti5553 Alloys

Influence of substructures on precipitation behavior and mechanical properties of cryogenic rolled Al-Mg-Si alloys during aging treatment

Improved microstructures and mechanical properties for 7085Al alloy subjected to slow quenching by aging treatment

Experimental and Simulation Study for the Influence of Thermal Pre-Deformation on Subsequent Aging Precipitation Kinetics of Al-Zn-Mg-Cu Alloy

Effect of Aging Precipitate on Ductility Anisotropy and Low Cycle Fatigue Behavior of AA2195 Al-Li Alloy

Influence of Deformation on Precipitation Behavior of 2024al Alloy

An Insight into the Precipitate Evolution and Mechanical Properties of a Novel High-Performance Cast Al-Li-Cu-Mg-X Alloy