Abstract:The use of Holographic Optical Elements (HOEs) in applications, such as in light shaping and redirection, requires certain characteristics such as a high Diffraction Efficiency, low angular selectivity and stability against UV damage. In order to maximize the performance of the HOEs, photosensitive materials are needed that have been optimised for the characteristics that are of particular importance in that application. At the core of the performance of these devices is the refractive index modulation created during holographic recording. Typically, a higher refractive index modulation will enable greater light Diffraction Efficiency and also operation with thinner devices, which in turn decreases the angular selectivity and the stability of the refractive index modulation introduced during recording, which is key to the longevity of the device. Solar concentrators based on volume HOEs can particularly benefit from thinner devices, because, for a solar concentrator to have a high angular working range, thinner photopolymer layers with a smaller angular selectivity are required. This paper presents an optimisation of an acrylamide-based photopolymer formulation for an improved refractive index modulation and recording speed. This was achieved by studying the effect of the concentration of acrylamide and the influence of different initiators in the photopolymer composition on the diffraction efficiency of holographic gratings. Two initiators of different molecular weights were compared: triethanolamine (TEA) and methyldiethanolamine (MDEA). A fivefold increase in the rate of grating formation was achieved through the modification of the acrylamide concentration alone, and it was also found that holograms recorded with MDEA as the initiator performed the best and recorded up to 25% faster than a TEA-based photopolymer. Finally, tests were carried out on the stability of the protected and unprotected photopolymer layers when subjected to UV light. The properties exhibited by this photopolymer composition make it a promising material for the production of optical elements and suitable for use in applications requiring prolonged exposure to UV light when protected by a thin melinex cover.

Diffractive Optical Elements with a Large Angle of Operation Recorded in Acrylamide Based Photopolymer on Flexible Substrates

Flat Optical Lens by Use of 90-Degree Volume Holographic Grating Recording Geometry and Nonvolatile Thermal Fixing in LiNbO3:Fe Crystal

Using acrylamide-based photopolymers for fabrication of holographic optical elements in solar energy applications

Volume holographic optical element for high-definition imaging

Structural Investigations of Multiple Gratings Recorded in Polymer-Dispersed Liquid Crystals Film by Holography

Self-focusing 3D lithography with varying refractive index polyethylene glycol diacrylate

Liquid-crystal-polymer binary diffractive optical elements with a sub-micrometer feature size realized by a contact polarization holography

Improving the Uniformity of Holographic Recording Using Multilayer Photopolymer. Part I. Theoretical Analysis

Single- and multi-layer micro-scale diffractive lens fabrication for fiber imaging probes with versatile depth-of-field

Recording Reflection Volume Holographic Gratings with Enhanced Performance by Two‐Stage Photopolymers Containing Bifunctional Monomers

Study of the Effect of Methyldiethanolamine Initiator on the Recording Properties of Acrylamide Based Photopolymer

Shapeshifting diffractive optical devices

3D Switchable Diffractive Optical Elements Fabricated with Two‐Photon Polymerization

Modelling and Design of Holographic Optical Elements for Beam-Coupling Applications for a Range of Incident Beam Angles

Thin Wide Range Varifocal Diffractive Alvarez Lenses Actuated by Dielectric Elastomers

Enabling Manufacturable Optical Broadband Angular-Range Selective Films.

Stacked volume holographic gratings for extending the operational wavelength range in LED and solar applications

Multi-imaging Characteristics of Electrically Controlled On-Axis Holographic Polymer-Dispersed Liquid-Crystal Fresnel Lens

Improving the Holographic Recording Characteristics of a Water-Resistant Photosensitive Sol–Gel for Use in Volume Holographic Optical Elements

LED-Cured Reflection Gratings Stored in an Acrylate-Based Photopolymer

Diffractive Devices Fabricated on Azobenezene Polymer by Polarization Laser Direct-Writing