Abstract:This paper presents the design and measurement of an IEEE 802.11ad standard compatible RF transceiver for 60 GHz wireless communication systems. In addition to the traditional half-duplex (HD) mode, this work supports full-duplex (FD) operations to deliver better channel utilization and faster response times for the system. The isolation between the transmitter and receiver from the architecture design to system integration for FD operations has been fully considered. A digital self-interference cancellation (DSIC) is implemented in MATLAB to verify the FD performance. The super-heterodyne architecture with an intermediate frequency (IF) of 12 GHz is designed to suppress the image frequencies without using extra filters. A flexible phase-locked loop (PLL) synthesizer provides a local oscillator (LO) frequency with a 2 kHz resolution. Other than the time division duplex (TDD) mode used in the conventional 60 GHz system, a wide-bandwidth baseband digital variable-gain amplifier (DVGA) with a 3 dB bandwidth of more than 4 GHz also supports frequency division duplex (FDD) operations. The transceiver chip is fabricated using the Tower Jazz 0.18 μm SiGe BiCMOS process. With an on-board antenna, the transceiver covers all four channels in the 802.11ad standard, with MCS-12 (7.04 Gbps under 1.76 GSym/s and 16-QAM) under 1.5 m. In the proposed system design, the RF frontend-based self-interference (SI) suppression from the local transmitter to receiver LNA is around 54 dB. To achieve a practical FD application, the SI is further suppressed with the help of a digital SI compensation. The measured power consumption for the transmitter and receiver configurations are 194 mW and 231 mW, respectively, in HD mode and 398 mW for the FDD or FD operation mode.

IEEE 802.11ad: directional 60 GHz communication for multi-Gigabit-per-second Wi-Fi [Invited Paper]

0.4 THz Photonic-Wireless Link with 106 Gb/s Single Channel Bitrate

26.8-M THz Wireless Transmission of Probabilistic Shaping 16-QAM-OFDM Signals

100 Gbit/s 350 GHz Photonic-Wireless Transmission

Millimeter-wave Wireless LAN and its Extension toward 5G Heterogeneous Networks

Association, Blockage and Handoffs in IEEE 802.11ad based 60GHz Picocells- A Closer Look

Throughput Enhancement of IEEE 802.11ad Through Space-Time Division Multiple Access Scheduling of Multiple Co-Channel Networks

Inter-network spatial sharing with interference mitigation based on IEEE 802.11ad WLAN system

Enabling Indoor Mobile Millimeter-wave Networks Based on Smart Reflect-arrays.

Enhanced Accessibility of 350 GHz 100 Gbit/s 16-QAM Photonic Wireless Link

A Full-Duplex 60 GHz Transceiver with Digital Self-Interference Cancellation

IEEE 802.11ay based mmWave WLANs: Design Challenges and Solutions

Selection of Modulation and Coding Schemes of Single Carrier PHY for 802.11ad Multi-Gigabit Mmwave WLAN Systems

A Fully Integrated 60ghz Four Channel CMOS Receiver with 7ghz Ultra-Wide Bandwidth for IEEE 802.11ad Standard

IEEE 802.11ac: Enhancements for Very High Throughput WLANs

A Fully Integrated CMOS 60-Ghz Transceiver for IEEE802.11ad Applications.

Millimeter-Wave Enhanced Local Area Systems: A High-Data-Rate Approach for Future Wireless Networks.

Wi-Fi 8: Embracing the Millimeter-Wave Era

Maximising the Utility of Enterprise Millimetre-Wave Networks

The Ultimate Weapon for Ultra-Broadband 6G: Digital Beamforming and Doubly Massive mmWave MIMO

A Millimeter Wave Digital CMOS Baseband Transceiver for Wireless LAN Applications