Abstract:Wind turbines (WT) are steadily growing in size to increase their power production, which also causes increasing loads acting on the turbine's components. At the same time large structures, such as the blades and the tower get more flexible. To minimize this impact, the classical control loops for keeping the power production in an optimum state are more and more extended by load alleviation strategies. These additional control loops can be unified by a multiple-input multiple-output (MIMO) controller to achieve better balancing of tuning parameters. An example for MIMO control, which has been paid more attention to recently by wind industry, is Model Predictive Control (MPC). In a MPC framework a simplified model of the WT is used to predict its controlled outputs. Based on a user-defined cost function an online optimization calculates the optimal control sequence. Thereby MPC can intrinsically incorporate constraints e.g. of actuators. Turbine models used for calculation within the MPC are typically simplified. For testing and verification usually multi body simulations, such as FAST, BLADED or FLEX5 are used to model system dynamics, but they are still limited in the number of degrees of freedom (DOF). Detailed information about load distribution (e.g. inside the gearbox) cannot be provided by such models. In this paper a Model Predictive Controller is presented and tested in a co-simulation with SlMPACK, a multi body system (MBS) simulation framework used for detailed load analysis. The analysis are performed on the basis of the IME6.0 MBS WT model, described in this paper. It is based on the rotor of the NREL 5MW WT and consists of a detailed representation of the drive train. This takes into account a flexible main shaft and its main bearings with a planetary gearbox, where all components are modelled flexible, as well as a supporting flexible main frame. The wind loads are simulated using the NREL AERODYN v13 code which has been implemented as a routine to SlMPACK. This modeling approach allows to investigate the nonlinear behavior of wind loads and nonlinear drive train dynamics. Thereby the MPC's impact on specific loads and effects not covered by standard simulation tools can be assessed and investigated. Keywords. wind turbine simulation, model predictive control, multi body simulation, MIMO, load alleviation

Load Calculation on Wind Turbines: Validation of Flex5, Alaska/Wind, MSC.Adams and SIMPACK by Means of Field Tests

Field test validation of Flex5, MSC.Adams, alaska/Wind and SIMPACK for load calculations on wind turbines

Loading Methodology and Dynamics Analysis of the Digital-Servo Hydraulic Cylinders Group in Large Wind Turbine Drivetrain Test Bench

Reproduction of five degree-of-freedom loads for wind turbine using equispaced electro-hydraulic actuators

Validation of a coupled atmospheric–aeroelastic model system for wind turbine power and load calculations

Loading System and Control Strategy for Simulating Wind Turbine Loads

RESEARCH ON THE LOAD oF OFFSHORE WIND TURBINE'S TOWER AND FOUNDATION

Development of a Load Model Validation Framework Applied to Synthetic Turbulent Wind Field Evaluation

Design of Dynamic Simulation of Wind Turbine

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

MODEL ANALYSIS AND TEST RESEARCH OF HORIZONTAL-AXIAL MARINE CURRENT TURBINE

An Efficient Computational Analysis and Modelling of Transferred Aerodynamic Loading on Direct-Drive System of 5 MW Wind Turbine and Results Driven Optimisation for a Sustainable Generator Structure

Analyzing and Validating Energy Performance through Computational Simulation of a Helical Vertical Axis Wind Turbine

Control-oriented wind turbine load estimation based on local linear neuro-fuzzy models

Development and performance study of a multi-degree-of-freedom loading device for real-time hybrid model testing of floating offshore wind turbines

Numerical Prototyping of Floating Offshore Wind Turbines: Virtual Operation in Real Environmental Conditions

A multi-drive aerodynamic load simulator for floating wind turbine model tests: Development, test and application

Investigation of the validity of BEM for simulation of wind turbines in complex load cases and comparison with experiment and CFD

Performance Simulation of High-Power Wind Turbine under the Action of Wind and Wave

Wind Climate Parameters for Wind Turbine Fatigue Load Assessment

Model predictive control of a wind turbine modelled in Simpack