Abstract:To solve the deformations and stiffnesses changes of linear rolling guideway under different loads, and to provide reference for the structural design of the carriage, this paper presents an analytical model of three-degrees-of-freedom static stiffness for linear rolling guideway considering the structural deformations of the carriage. In this study, first, the contact loads and elastic deformations between balls and raceways caused by external loads and preload were obtained by Hertz contact theory. The elastic deformations between balls and raceways were described by the change of the curvature centers of the carriage raceways. Next, according to the constraints and loading conditions of the carriage, the elastic beam theory was introduced, and the structural deformations of the carriage under the contact loads were equivalent to the deformations of two cantilever beams. Then, the external loads and the displacements of the carriage were derived by the static equilibrium conditions of the carriage. At last, the proposed equivalent model of carriage structure deformations was validated by comparing the calculated deformations of the carriage with those from a commercial program under various loading conditions, and the accuracy of the static stiffness model proposed in this paper was further verified by the experimental results in the reference. The results show that the calculated structural deformations of carriage matched the deformations calculated by a commercial program well. Also, with relative errors of 4.4–17.5%, the calculated stiffnesses using the model proposed in this paper more closely matched the measured stiffnesses. Clearly, there is a better match between the calculated results of the proposed model and the measurements than with the conventional rigid model.

Carriage Drift in Linear-Guideway Type Roller Bearings

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Reduction of Sticking in a Linear-Guideway Type Recirculating Ball Bearing

Dynamic Behavior Analysis of Feed Drive System Using Linear Guideways with Different Ball Diameters

An analytical model of static stiffness for linear rolling guideway considering the structural deformations of carriage

Effects of misaligned rails on the friction force–displacement curves of a linear ball bearing system in low-speed operation

Research on nonlinear static and dynamic characteristics of linear guideway in machine tools considering carriage flexibility

Dynamic Characteristics of Linear Rolling Guide Joint Based on Contact Stiffness

Investigation of static characteristics for linear rolling guide with considering geometric errors

Skidding Behavior of Cylindrical Roller Bearings under Time-Variable Load Conditions

Study on dynamic performance of high-speed railway vehicle using roller rig and numerical simulation

Skidding characteristics of urban rail vehicle axle-box bearings considering surface waviness on races

Dynamic Forces and Vibrations of the Planetary Gear-Set Radial Bearings with the Roller Dimension Deviation

Study on the vibration characteristics of double-row tapered roller bearings for high-speed rail axle box

Nonlinear dynamic model for linear guideway with crowning subjected to external load in five directions

A review of static and dynamic analysis of ball screw feed drives, recirculating linear guideway, and ball screw

Analysis of friction fluctuations mechanism of a preloaded roller linear motion guide based on a new 5-DOF dynamic stiffness model

Investigation on Dynamic Characteristics of High Speed Bearing Cage

Effect of combined geometric errors on static load distribution and deformations for linear rolling guide

Stochastic vibration analysis for linear rolling guide with considering geometric errors

Analysis of the Vertical Stiffness of Rolling Guide That Involves the Elastic Deformation of Carriage Skirt