Abstract:Abstract Gas turbine combustion chambers contain numerous small-scale features that help to dampen acoustic waves and alter the acoustic mode shapes. This damping helps to alleviate problems such as thermoacoustic instabilities. During computational fluid dynamics simulations (CFD) of combustion chambers, these small-scale features are often neglected as the corresponding increase in the mesh cell count augments significantly the cost of simulation while the small physical size of these cells can present problems for the stability of the solver. In problems where acoustics are prevalent and critical to the validity of the simulation, the neglected small-scale features and the associated reduction in overall acoustic damping can cause problems with spurious, non-physical noise and prevents accurate simulation of transients and limit cycle oscillations. Low-order dynamical systems (LODS) and artificial neural networks (ANNs) are proposed and tested in their ability to represent a simple two-dimensional acoustically forced simulation of an orifice at multiple frequencies. These models were built using compressible CFD, using OpenFOAM, of an orifice placed between two ducts. The acoustic impedance of the orifice has been computed using the multi-microphone method and compared to a commonly used analytical model. Following this, the flow field downstream of the orifice has been modelled using both a LODS and ANN model. Both methods have shown the ability to closely represent the simulated dynamical flows at much lower computational cost than the original CFD simulation. This work opens the possibility of models that can dynamically predict the flow through, for instance, acoustic liners, dilution ports and fuel injectors in real engines during thermoacoustic instabilities without having to mesh and simulate these small-scale features directly. Such models may also assist in the accurate simulation of flame quenching due to cooling flows or the design of effusion cooled aerodynamic surfaces such as nozzle guide vanes (NGVs) and turbine blades.

A reduced finite element model for sound propagation in straight and slowly varying cross section ducts

Finite Element Method Based on High Order Mesh for Traveling-wave Tube Simulation

Numerical simulation of sound propagation in and around ducts using thin boundary elements

A hybrid finite element approach to modeling sound radiation from circular and rectangular ducts

An improved multimodal method for sound propagation in nonuniform lined ducts

On Modeling the Sound Propagation Through a Lined Duct with a Modified Ingard-Myers Boundary Condition

Three-Dimensional Acoustic Analysis of a Rectangular Duct with Gradient Cross-Sections in High-Speed Trains: A Theoretical Derivation

A 2.5D acoustic finite element method applied to railway acoustics

A reduced-order boundary element method for two-dimensional acoustic scattering

A low frequency model for the aeroacoustic scattering of cylindrical tube rows in cross-flow

Sound Wave Scattering in a Flow Duct with Azimuthally Non-Uniform Liners

Theoretical Study of Sound Propagation in Lined Duct with Rigid Splices Using Wiener-Hopf Method

Explicit approximation of the wavenumber for lined ducts

Acoustic absorption and generation in ducts of smoothly varying area sustaining a mean flow and a mean temperature gradient

On reduction of noise emissions from thin-walled slender tubes by means of acoustic metamaterials

A combinatorial model reduction method for the finite element analysis of wind instruments

An Energy Diffusion Model for Interior Acoustics With Structural Coupling Using the Boundary Element Method

Towards Reduced Order Models of Small-Scale Acoustically Significant Components in Gas Turbine Combustion Chambers

Multiscale model reduction of finite-difference frequency-domain wave modelling in acoustic media

Efficient and Stable Finite Difference Modelling of Acoustic Wave Propagation in Variable-density Media

Theoretical Model of Scattering from Flow Ducts with Semi-Infinite Axial Liner Splices