Abstract:Ice adhesion is important when designing aircraft anti-icing/de-icing systems. Major and minor grooves are common in the skin of aircraft. However, the effects of millimeter-scale grooves on ice adhesive strength have not been given due attention. Specimens with varying depths, widths, and numbers of grooves were fabricated by machining to investigate the ice adhesive characteristics of large-sized grooved aluminum surfaces. After the ice cube was frozen on the surface using a silicon mold, the adhesive force was measured using a self-assembled shear adhesive force setup. A correlation between groove size and apparent adhesive strength in the perpendicular loading direction was established based on the experimental results. Every 1% increase in the groove width ratio was associated with an 18.7 kPa increase in apparent adhesive strength. The increasing speed of the adhesion rapidly decayed as the groove depth increased. The increase in adhesion reached 99% of the maximum increase when the groove depth reached 0.8 times the width. The number of grooves had little effect on the adhesion when the total width of the grooves was kept constant. Stress distribution analysis was conducted using the finite element method, and the results were in accordance with the cracking phenomena in the experiments. The adhesive strength in the parallel loading direction was 30% lower than that in the perpendicular loading direction for all six chosen surfaces. This study is the first to propose a quantitative relationship between the surface textures of millimeter-sized grooves and ice adhesive strength. The loading orientation also had a substantial influence on adhesion. The results will serve as a valuable reference for future studies on ice adhesion on textured surfaces and for improving the performance of anti-icing/de-icing systems.

Adhesion shear strength test method for freshwater/seawater ice on carbon ceramic brake pads of amphibious aircraft

Effects of Freezing Temperature and Salinity on the Adhesion Shear Strength of Amphibious Aircraft Tires under Static Icing

Experimental Investigation on Ice–Aluminum Interface Adhesion Strength under Heating Conditions

High-Temperature And High-Speed Abadable Tester For Abradability Test Of Seal Coatings

Experimental Study on Adhesive Characteristics of Aircraft Dynamic Icing

Research on normal ice adhesion strength in icing wind tunnel

A new method based on the shear lag model for accurate determination of ice adhesion shear strength on solid surface

Interlaboratory Study of Ice Adhesion Using Different Techniques

Shear Adhesion of Ice on Large-Sized Grooved Aluminum Surfaces

Adhesive strength of ice on solid surfaces under dynamic heating condition

Study on de-icing criterion of anti-icing coating and simulation analysis method of mechanical de-icing process for polar ship superstructure

Effect of the experimental parameters on the ice-asphalt adhesion strength and corresponding theoretical model based on the energy-balanced principle

Effect of Various Surface Coatings on De-Icing/Anti-Icing Fluids Aerodynamic and Endurance Time Performances

Anti-freezing asphalt concrete: ice-adhesion performance

Laboratory measurement of the adhesion strength between asphalt concrete and ice layer

Effect of Shear Loading Conditions on the Measured Strength of Ice Adhesion to Superhydrophobic Surfaces

Liquid water content measurement with SEA multi-element sensor in CARDC icing wind tunnel: Calibration and performance

Wind tunnel test of ice accretion on blade airfoil for wind turbine under offshore atmospheric condition

An Experimental Study on Adhesion Strength of Offshore Atmospheric Icing on a Wind Turbine Blade Airfoil

Research on the Test Technology for Vertical Ice Adhesion Strength

A new method for measuring ice adhesion strength at an ice–substrate interface