Abstract:Ice adhesion is important when designing aircraft anti-icing/de-icing systems. Major and minor grooves are common in the skin of aircraft. However, the effects of millimeter-scale grooves on ice adhesive strength have not been given due attention. Specimens with varying depths, widths, and numbers of grooves were fabricated by machining to investigate the ice adhesive characteristics of large-sized grooved aluminum surfaces. After the ice cube was frozen on the surface using a silicon mold, the adhesive force was measured using a self-assembled shear adhesive force setup. A correlation between groove size and apparent adhesive strength in the perpendicular loading direction was established based on the experimental results. Every 1% increase in the groove width ratio was associated with an 18.7 kPa increase in apparent adhesive strength. The increasing speed of the adhesion rapidly decayed as the groove depth increased. The increase in adhesion reached 99% of the maximum increase when the groove depth reached 0.8 times the width. The number of grooves had little effect on the adhesion when the total width of the grooves was kept constant. Stress distribution analysis was conducted using the finite element method, and the results were in accordance with the cracking phenomena in the experiments. The adhesive strength in the parallel loading direction was 30% lower than that in the perpendicular loading direction for all six chosen surfaces. This study is the first to propose a quantitative relationship between the surface textures of millimeter-sized grooves and ice adhesive strength. The loading orientation also had a substantial influence on adhesion. The results will serve as a valuable reference for future studies on ice adhesion on textured surfaces and for improving the performance of anti-icing/de-icing systems.

Research on the Test Technology for Vertical Ice Adhesion Strength

Interlaboratory Study of Ice Adhesion Using Different Techniques

Research on normal ice adhesion strength in icing wind tunnel

Experimental Study on Adhesive Characteristics of Aircraft Dynamic Icing

Experimental Investigation on Ice–Aluminum Interface Adhesion Strength under Heating Conditions

Study on shear test and shear displacement of frozen joints with different opening degrees

Shear Adhesion of Ice on Large-Sized Grooved Aluminum Surfaces

The need for standards in low ice adhesion surface research: a critical review

Adhesive strength of ice on solid surfaces under dynamic heating condition

The effect of ice type on ice adhesion

Laboratory measurement of the adhesion strength between asphalt concrete and ice layer

A high throughput tensile ice adhesion measurement system

Parameter Study for the Ice Adhesion Centrifuge Test

Tensile and Shear Test Methods for Quantifying the Ice Adhesion Strength to a Surface

Reframing ice adhesion mechanisms on a solid surface

Round-Robin Study for Ice Adhesion Tests

Ice Adhesion Properties on Micropillared Superhydrophobic Surfaces.

Comparative study on the influence of surface characteristics on de-icing evaluation

Supercooled Water Droplet Impact on Superhydrophobic Surfaces with Various Roughness and Temperature

The influence of temperature on the properties of anti - ice materials

An experimental study on the influence of humidity on ice adhesion strength on superhydrophobic surfaces with microstructures