Abstract:To reduce carbon emissions associated with substantial concrete usage in construction and achieve the objectives of green and low-carbon construction, this study innovatively develops a low-carbon binary material by adding limestone powder (LP) and silica fume (SF) into the conventional cement-based material, enhancing the comprehensive utility value of LP. The experimental results show that the addition of 15% LP and 5% SF increases the yield stress of the mortar yet substantially reduces the plastic viscosity to 2.84 Nmm·min, representing a 44.5% decrease compared to pure cement slurry. This reduction is conducive to long-distance pumping of the cement-based material. Moreover, the addition of 5% SF compensates for the 18.8% (mid-stage, 28-d) and 15.8% (late-stage, 90-d) strength loss in mortar caused by LP while simultaneously improving the strength of the co-mixed system by 10.4% (mid-stage) and 10.8% (late-stage). In the early-stage measurements of the LP-SF binary cement-based materials, it is observed that while SF slightly increases the hydration heat release, LP suppresses the early hydration heat release. Therefore, the total heat release observed in the 15% LP and 5% SF group after 72 h is only 254 J/g, demonstrating favorable temperature control and crack prevention effects. In addition, X-ray diffraction (XRD) and thermogravimetric/differential thermogravimetric (TG/DTG) phase analysis reveal a notable increase of 53.56% in CH consumption. Besides, the weight loss on ignition of C-S-H crystals increases, indicating that the secondary hydration of LP and the pozzolanic reaction of SF promote the production of C-S-H in the system. Combined with the late-stage strength and water absorption characteristics, it is concluded that the system exhibits good mechanical properties and compactness. This study presents a use of mixed proportion that enables excellent mechanical properties, good pumping performance, and low hydration heat. Moreover, the analysis indicates that the carbon emission of each cubic meter of the as-developed mortar is reduced by approximately 16.7–23.9%, promoting the efficient and clean utilization of LP and SF.

Microwave preparation and carbonation properties of low-carbon cement

Carbonation Curing of Industrial Solid Waste‐based Aerated Concretes

Microstructure Refinement of Calcium-Sulfate-aluminate and Portland Cement (CSA-PC) Hybrids with Accelerated CO2 Curing (ACC)

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Enhanced Carbonation Curing of Cement Pastes with Dolomite Additive

Carbonation-hardening properties and ITZ microstructure of low-calcium CO2 sequestration binder mortar

Impacts of microwave on hydration evolution of Portland cement in the perspective of composition and microstructure of hydrates

Examining the early-stage performance and mechanical performance of limestone powder-silica fume binary cement-based materials

Experimental study on the macroscopic and microscopic properties of cement paste backfill after treatment with carbon dioxide carbonize filling slurries during the mixing process

Hydration and microstructure evolution of a novel low-carbon concrete containing recycled clay brick powder and ground granulated blast furnace slag

Preparation aragonite whisker-rich materials by wet carbonation of cement: Towards yielding micro-fiber reinforced cement and sequestrating CO2

Microstructural Evolution of Calcium Sulfoaluminate Cement during the Wet-Carbonation Process

Research on the Water Absorption and Release Characteristics of a Carbonized γ-C2S Lightweight Aggregate in Lightweight and High-Strength Concrete

Research Progress of Low-Carbon Cementitious Materials Based on Synergistic Industrial Wastes

Study on the Properties and Hydration Mechanism of Calcium Carbide Residue-Based Low-Carbon Cementitious Materials

Carbonation of photocatalytic aluminosilicate cement composites: Evolution of self-cleaning and radiative cooling properties

Accelerated Mineral Carbonation Curing of Cement Paste for CO2 Sequestration and Enhanced Properties of Blended Calcium Silicate

Experimental investigation into the self-carbonation mechanism of magnesium oxide carbon sequestration foamed concrete

Development of Ultrafine Mineral Admixture from Magnesium Slag and Sequestration of CO2

Review on CO2 curing of non-hydraulic calcium silicates cements: Mechanism, carbonation and performance

Hydration mechanism and mechanical properties of a developed low-carbon and lightweight strain-hardening cementitious composites