Abstract:Calcium silicate hydrate (C-S-H), as the main component of cementitious materials, is susceptible to carbonation presenting a potential to capture CO2. Although some researches paid attentions to the carbonation behaviors of C-S-H given the durability of concrete structure, the kinetics of C-S-H carbonation as well as changes of C-S-H itself under carbonation have not been fully addressed. In this study, the carbonation kinetics of C-S-H with various calcium to silica ratio (Ca/Si) were investigated and the evolution of carbonation products in terms of compositions and micro-mechanical properties was quantitatively characterized by quantitative X-ray diffraction (QXRD), energy dispersive spectroscopy (EDS), and nuclear magnetic resonance (NMR). Three distinct periods are found in the course of C-S-H carbonation, encompassing dissolution period, diffusion period and slowly ongoing reaction period. A progressive decrease in Ca/Si and pH is observed in dissolution period with the formation of calcium carbonate, the reaction rate of which is strongly dependent on the initial Ca/Si of C-S-H. In the diffusion period, a small proportion of crosslinking occurs in C-S-H structure before producing a large amount of calcium modified silica gel, during when the Ca/Si and pH remain unchanged due to the incongruent dissolution of C-S-H as revealed by thermodynamic modellings. In the slowly ongoing reaction period, C-S-H decomposed completely and the mixture of microcrystalline calcium carbonate and calcium modified silica gel becomes the final product. The micro-mechanical property of C-S-H was significantly weakened by the change of phase assemblage. Our findings do not only advance our understandings on the deterioration of cementitious material under carbonation but also provides new insights into the CO2 capture using C-S-H widely existing in cementitious materials.

Carbonation of photocatalytic aluminosilicate cement composites: Evolution of self-cleaning and radiative cooling properties

Self-cleaning performance of autoclaved photocatalytic cement pastes: Insights into phase composition, microstructure and aluminum incorporation in C–S–H

Microstructure Refinement of Calcium-Sulfate-aluminate and Portland Cement (CSA-PC) Hybrids with Accelerated CO2 Curing (ACC)

Understanding the Role of Calcium Silicate Slag in Sodium Carbonate-Activated Green Materials: Influence on Kinetics, Strength, and Efflorescence

Properties and Microstructures of 3D Printable Sulphoaluminate Cement Concrete Containing Industrial By-Products and Nano Clay

Early-age carbonation mitigation of SSC by CxS minerals: Mechanism and Performances

Carbonation Curing of Industrial Solid Waste‐based Aerated Concretes

An Overview on the Influence of Various Parameters on the Fabrication and Engineering Properties of CO2-cured Cement-Based Composites

Microstructural Evolution of Calcium Sulfoaluminate Cement during the Wet-Carbonation Process

Influences of titanium dioxide nanoparticles on regulation of crystalline growth and early carbonation of cementitious composites

Effects of Curing Regimes on Calcium Oxide–Belite–Calcium Sulfoaluminate-Based Aerated Concrete

Development of photocatalytic carbonation coating for concrete: Enhancement of air quality and sequestration of CO2

Influence of enforced carbonation on alkali-silica reaction: performance and multi-scale mechanisms

Aqueous carbonation of aged blended Portland cement pastes: Impact of the Al/Si ratio on the structure of the alumina-silica gel

Carbonation behavior of calcium silicate hydrate (C-S-H): Its potential for CO2 capture

Mechanical and Microstructural Characteristics of Calcium Sulfoaluminate Cement Exposed to Early-Age Carbonation Curing

Advancing self-cleaning performance in metakaolin-based geopolymers through in-situ zeolite formation and TiO 2 integration

Hydration Characteristics of Tricalcium Aluminate in the Presence of Nano-Silica

Carbonation resistance of different types of calcium silicate hydrates

Study on Visible Light Catalysis of Graphite Carbon Nitride-Silica Composite Material and Its Surface Treatment of Cement

Microstructure refinement of calcium-sulfate-aluminate and portland cement (CSA-PC) hybrids with accelerated CO 2 curing (ACC)